Re: Servo centering

Article View: rec.models.rc

Article #1872

#1872

From: John Moonan
Date: Fri, 22 Jan 1993 10:44

12 lines
867 bytes

	Other servo manufacturers besides Kraft provide the servo centering
control in the center of the output shaft.  For example, ACE Bantam servos and 
some old Royal servos that I own have this feature.  Futaba doesn't have this
but instead has an output shaft that is splined vs square so that it alows
small centering adjustments to be made by removing and repositioning the 
servo arm.
--

					THANX, John Moonan
					SYSOP, 495th R/C Squadron
					Groton, MA

Technical Details

Message-ID: <JMOONAN.93Jan22104435@ccv1.bbn.com>

Path: arc1-ca.pugleaf.net!sparky!uunet!paladin.american.edu!howland.reston.ans.net!usc!news.bbn.com!news.bbn.com!jmoonan

References: 12522

Show Full Headers

Complete Article Headers

Path: arc1-ca.pugleaf.net!sparky!uunet!paladin.american.edu!howland.reston.ans.net!usc!news.bbn.com!news.bbn.com!jmoonan
From: jmoonan@ccv1.bbn.com (John Moonan)
Newsgroups: rec.models.rc
Subject: Re:  Servo centering
Date: 22 Jan 93 10:44:35
Organization: BBN Communications, Cambridge, MA
Lines: 12
Message-ID: <JMOONAN.93Jan22104435@ccv1.bbn.com>
References: 12522
NNTP-Posting-Host: ccv1.bbn.com

Reply to Parent Message