Article View: rec.models.rc
Article #1983Re: Connecting servo cable to rudder
From: Greg Tarcza
Date: Mon, 25 Jan 1993 15:02
Date: Mon, 25 Jan 1993 15:02
19 lines
1425 bytes
1425 bytes
cwc51@cas.org (Charles W. Collins) writes:
>
> What is the best method for connecting a rudder that is on an angle (about
> 20 degrees)? There is upward swing produced at the connection point as the
> rudder moves back and forth.
Ball joints will do the job. Your local hobby shop should stock them (I
think Dubro makes them).
Greg T.
===============================================================================
Greg Tarcza WA2OOD /
Hewlett-Packard Company Pikes /
P.O. Box 2197 Peak /-, /-,
Colorado Springs, CO 80901 Soaring / / / /
719-590-2471 Society / / /--/
/
gregt@col.hp.com /
===============================================================================
Technical Details
Message-ID:
<1k0vdsINNeie@hp-col.col.hp.com>Path:
arc1-ca.pugleaf.net!sparky!uunet!usc!sdd.hp.com!col.hp.com!gregtReferences:
<1993Jan25.130710.983@cas.org>Show Full Headers
Complete Article Headers
Path: arc1-ca.pugleaf.net!sparky!uunet!usc!sdd.hp.com!col.hp.com!gregt From: gregt@col.hp.com (Greg Tarcza) Newsgroups: rec.models.rc Subject: Re: Connecting servo cable to rudder Date: 25 Jan 1993 15:02:20 GMT Organization: HP Colorado Springs Division Lines: 20 Message-ID: <1k0vdsINNeie@hp-col.col.hp.com> References: <1993Jan25.130710.983@cas.org> NNTP-Posting-Host: hpcsrc9.col.hp.com