🚀 go-pugleaf

In article <1993Jan6.141743.16200@aio.jsc.nasa.gov> goza@norm.JSC.NASA.GOV (Mike Goza) writes:
>Does anyone out in netland have experience with smoke systems on
>YS120FS engines?  Which ones are available?  Which are the best
>based on experience?
>
>The only one I have been able to find commercially is one made by
>AMP 912-367-0567.  It comes with a preheater, pump and valve for
>$50.00.  It sounds like it would work fine, but I would like to
>hear peoples experiences.  This is my first smoke system and I 
>would like to get it right the first time! ;)
>
>Any help would be greatly appreciated.
>
>Thanks,
>Mike Goza
>goza@cheers.jsc.nasa.gov
>

Don Harris Products makes a beautful Pitts style muffler/smoke system
for the YS-120. The cost is around $100.00 which includes muffler,
pump and check valve, you supply heat resistant tubing and battery.
I have one of Don's systems on a 1/4 scale Starduster Too with
Zenoah G-62 engine and another on a Goldberg Extra 300 with YS-120FS.
Both systems work very well. For smoke fluid I've used Texaco Almag,
a light grade lubricant, and Dick Bennett's Smoke Fluid, both smoke
quite well. Harris Products is in California and the last phone number
I had for him is (916) 269-1164.

-- 
=========================================================================
phil blais  N6KXD AMA 12662      ITT    Aerospace Communications Division
dcdwest!plb@ucsd.edu           DEFENSE    10060 Carroll Canyon Road
 (619) 578-3080					San Diego, CA 92131