Re: Spinner backplate slippage cure

Article View: rec.models.rc

Article #2146

#2146

From: David Svoboda
Date: Sun, 10 Jan 1993 19:44

10 lines
971 bytes

In article <1993Jan8.231508.12301@bmerh85.bnr.ca> mkfeil@bcrki9.bnr.ca (Max Feil) writes:
|
|Good points. My disks are quite brittle, 

Just a little thing about brittle cutoff disks--if you apply CA to the disk,
so it soaks in evenly all over, it cuts just as well and is MUCH stronger.
I used to use the "weaved" style of cutoff disk, until I did this, and I haven't
broken one yet, they just wear out.

			Dave Svoboda, Palatine, IL

Technical Details

Message-ID: <1993Jan10.194424.20586@rtsg.mot.com>

Path: arc1-ca.pugleaf.net!sparky!uunet!panther!mothost!white!rtsg.mot.com!svoboda

References: <1993Jan7.140305.1624@bmerh85.bnr.ca> <1993Jan7.140821.1782@bmerh85.bnr.ca> <1993Jan8.231508.12301@bmerh85.bnr.ca>

Show Full Headers

Complete Article Headers

Newsgroups: rec.models.rc
Path: arc1-ca.pugleaf.net!sparky!uunet!panther!mothost!white!rtsg.mot.com!svoboda
From: svoboda@rtsg.mot.com (David Svoboda)
Subject: Re: Spinner backplate slippage cure
Message-ID: <1993Jan10.194424.20586@rtsg.mot.com>
Sender: news@rtsg.mot.com
Nntp-Posting-Host: guppie44
Organization: Motorola Inc., Cellular Infrastructure Group
References: <1993Jan7.140305.1624@bmerh85.bnr.ca> <1993Jan7.140821.1782@bmerh85.bnr.ca> <1993Jan8.231508.12301@bmerh85.bnr.ca>
Date: Sun, 10 Jan 1993 19:44:24 GMT
Lines: 10

Reply to Parent Message