Article View: rec.models.rc
Article #2174Re: Airborne Battery Monitor Schematic
From: Sean McCaskey
Date: Sun, 10 Jan 1993 19:13
Date: Sun, 10 Jan 1993 19:13
18 lines
1028 bytes
1028 bytes
In article <1993Jan5.154726.12650@mlb.semi.harris.com>, > >Disclaimer: >----------- Mark... Your system does not seem to be answering and I have a question for ya. I have sent a couple of MAIL messages only to have them bounce. You list 3 resistors in your discription and "schematic". In the schematic you refer to a 39kohm, r1 and r2. In the parts list you refer to 820, 220 and 39k ohm resistors. Which is r1 and which is r2. I assume the 39kohm is the same on both (grin)..... HELP! I want to build several of these and just need this info to get started. ---Sean--- seanm@terapin.com
Technical Details
Message-ID:
<seanm.36bm@terapin.com>Path:
arc1-ca.pugleaf.net!sparky!uunet!noc.near.net!hri.com!spool.mu.edu!agate!stanford.edu!kronos.arc.nasa.gov!butch!netcomsv!netcomsv!terapin!seanmReferences:
<1993Jan5.154726.12650@mlb.semi.harris.com>Show Full Headers
Complete Article Headers
Path: arc1-ca.pugleaf.net!sparky!uunet!noc.near.net!hri.com!spool.mu.edu!agate!stanford.edu!kronos.arc.nasa.gov!butch!netcomsv!netcomsv!terapin!seanm From: seanm@terapin.com (Sean McCaskey) Newsgroups: rec.models.rc Subject: Re: Airborne Battery Monitor Schematic Message-ID: <seanm.36bm@terapin.com> Date: 10 Jan 93 19:13:51 GMT References: <1993Jan5.154726.12650@mlb.semi.harris.com> Organization: BBS Lines: 18