(was) Re: Modelcad, whatabout Xmodelcad?

Article View: rec.models.scale

Article #169

#169

From: Jouni Lindqvist
Date: Wed, 14 Oct 1992 17:37

16 lines
1209 bytes

Is`nt there any cad programs that doesn`t cost anything on the net?
That is, that runs on a Sun Sparcstation under X-windows or similar.

                                 ___ 
                                /  /|  /| 
                               /  //  //
                              /  //  //      
                             /  //  //
                            /  //  //
                      _____/  //  //___
                     /       //       /\
                    /_______//_______/ /
                    \_______\\_______\/


 Jouni Lindqvist, Royal Institute of Technology, Stockholm, Sweden

Technical Details

Message-ID: <1992Oct14.173713.23789@kth.se>

Path: arc1-ca.pugleaf.net!sparky!uunet!mcsun!sunic!kth.se!nada.kth.se!d88-jli

References: <1992Oct12.120120.7571@eng.ufl.edu> <1992Oct13.210453.19336@javelin.sim.es.com> <13OCT199217464359@rosie.uh.edu>

Show Full Headers

Complete Article Headers

Newsgroups: rec.models.scale
Path: arc1-ca.pugleaf.net!sparky!uunet!mcsun!sunic!kth.se!nada.kth.se!d88-jli
From: d88-jli@nada.kth.se (Jouni Lindqvist)
Subject: (was) Re: Modelcad, whatabout Xmodelcad?
Message-ID: <1992Oct14.173713.23789@kth.se>
Keywords: freeware CAD for X-windows?
Sender: usenet@kth.se (Usenet)
Nntp-Posting-Host: hemul.nada.kth.se
Organization: Royal Institute of Technology, Stockholm, Sweden
References: <1992Oct12.120120.7571@eng.ufl.edu> <1992Oct13.210453.19336@javelin.sim.es.com> <13OCT199217464359@rosie.uh.edu>
Date: Wed, 14 Oct 1992 17:37:13 GMT
Lines: 18

Reply to Parent Message