Article View: rec.models.scale
Article #194Re: HELP! SdKfz 11/SdKfz 251 tracks
From: Goran Sedvall
Date: Thu, 15 Oct 1992 08:21
Date: Thu, 15 Oct 1992 08:21
24 lines
1200 bytes
1200 bytes
bruceb@mpd.tandem.com (Bruce Burden) writes: > Silly me, I bought a model of a SdKfz 11 and was surprised/delighted > to note that the model was sent with Model Kasten tracks. However, > after looking at the components, I realized that I hadn't the slightest > idea how these tracks are assembled. Does some kind soul have an old > set of instructions that could be sent to me? (the SdKfz 251 was > based on the SdKfz 11 chassis, so the tracks are the same). > Thanks, > Bruce If the tracks are cast in resin, which I suspect, I usually heat the parts in hot water or with a hairdrier and form the tracks to the requiered shape. Then I glue the parts together and on the wheels. It is very easy, but don't heat the parts over open flames. Goran
Technical Details
Message-ID:
<1992Oct15.082142.19433@ida.liu.se>Path:
arc1-ca.pugleaf.net!sparky!uunet!pipex!unipalm!uknet!mcsun!sunic!liuida!gseReferences:
<2648@devnull.mpd.tandem.com>Show Full Headers
Complete Article Headers
Path: arc1-ca.pugleaf.net!sparky!uunet!pipex!unipalm!uknet!mcsun!sunic!liuida!gse From: gse@ida.liu.se (Goran Sedvall) Newsgroups: rec.models.scale Subject: Re: HELP! SdKfz 11/SdKfz 251 tracks Message-ID: <1992Oct15.082142.19433@ida.liu.se> Date: 15 Oct 92 08:21:42 GMT References: <2648@devnull.mpd.tandem.com> Sender: news@ida.liu.se Organization: CIS Dept, Univ of Linkoping, Sweden Lines: 24