🚀 go-pugleaf

RetroBBS NetNews Server

Inspired by RockSolid Light RIP Retro Guy

Article View: rec.models.scale
Article #286

Re: Paint age

#286
From: Robert O'Brien
Date: Tue, 29 Dec 1992 06:55
20 lines
1324 bytes
As for 7 year old Humbrol - it depends on the container.

I've sucessfully used humbrol that was older than that, but it was either
in factory-sealed tins or transferred to glass during the long wait.

You'll know when you try to use it.  Even if there's still liquid
present, sometimes it just wont shake/stir properly.  I'd advise anyone
with aged paint of any brand to put in into one of those paint-shakers
(or make one from a pad-sander) for quite some time before opening it.
If you're spraying, then I also reccommend letting it sit for a while
after shaking. Stirring does not add as many bubbles as shaking, but
shaking does not fool you by making bad paint *seem* to mix.

I've also had Humbrol that was bad the day I bought it, which is why I
essentially always immediately put it into Polly-S/Floquil bottles.
If shaking sounds OK and it's _never_ been opened, then I think the
tin's probably fine.

	Bob 
--
Technical Details
Message-ID: <1992Dec29.065546.26144@netcom.com>
Path: arc1-ca.pugleaf.net!sparky!uunet!stanford.edu!apple!netcomsv!netcom.com!obrien
References: <1hnvboINNkfe@usenet.INS.CWRU.Edu>

Show Full Headers
Complete Article Headers
Path: arc1-ca.pugleaf.net!sparky!uunet!stanford.edu!apple!netcomsv!netcom.com!obrien
From: obrien@netcom.com (Robert O'Brien)
Newsgroups: rec.models.scale
Subject: Re: Paint age
Message-ID: <1992Dec29.065546.26144@netcom.com>
Date: 29 Dec 92 06:55:46 GMT
References: <1hnvboINNkfe@usenet.INS.CWRU.Edu>
Organization: Netcom Online Communications Services (408-241-9760 login: guest)
Lines: 20