Article View: sci.crypt
Article #2847Re: Any way to *CREATE* Vcr+ (VCR PLUS) codes??? (please read)
From: Paul Rubin
Date: Wed, 06 Jan 1993 02:19
Date: Wed, 06 Jan 1993 02:19
14 lines
1340 bytes
1340 bytes
You don't have to collect published codes, you can just sit down with the
VCR Plus+ device and start punching in numbers. But there are 9,999,999
7 digit codes (and each one requires 9 button presses to test), so it can
take a long time to get enough numbers.
What does pushing buttons on the device tell you? Doesn't pushing
a number like 1952037 cause the device to send some infrared pulses
at a particular time which is difficult to predict from the number
alone? Or does the device somehow display what is going to send and
when it is going to send them?
Note: I don't own a VCR+, or a VCR, or even a TV set so I'm asking
from curiosity only (I think it's an interesting problem). But
this should explain why I'm not familiar with using the device.
Technical Details
Message-ID:
<PHR.93Jan5181948@napa.telebit.com>Path:
arc1-ca.pugleaf.net!sparky!uunet!nntp.telebit.com!phrReferences:
<1iaa91INNhgr@agate.berkeley.edu> <1993Jan5.191138.16420@netcom.com> <29287@oasys.dt.navy.mil>Show Full Headers
Complete Article Headers
Newsgroups: sci.crypt Path: arc1-ca.pugleaf.net!sparky!uunet!nntp.telebit.com!phr From: phr@telebit.com (Paul Rubin) Subject: Re: Any way to *CREATE* Vcr+ (VCR PLUS) codes??? (please read) In-Reply-To: curt@kcwc.com's message of 5 Jan 93 22:06:32 GMT Message-ID: <PHR.93Jan5181948@napa.telebit.com> Sender: news@telebit.com Nntp-Posting-Host: napa Organization: Telebit Corporation; Sunnyvale, CA, USA References: <1iaa91INNhgr@agate.berkeley.edu> <1993Jan5.191138.16420@netcom.com> <29287@oasys.dt.navy.mil> Date: Wed, 6 Jan 1993 02:19:48 GMT Lines: 15