🚀 go-pugleaf

RetroBBS NetNews Server

Inspired by RockSolid Light RIP Retro Guy

Article View: sci.electronics.components
Article #208

Re: Best way to power array of LEDs?

#208
From: Michael A. Terrell
Date: Tue, 08 Oct 2002 17:45
37 lines
3234 bytes
Lizard Blizzard wrote:
> 
> James Sweet wrote:
> > The traffic light LED's use a transformerless power supply usually so they
> > flicker at 60 Hz, the yellow doesn't flicker because it's incandescent,
> > they're on so little that the savings of using LED's for them would be
> > minimal.
> 
> Around the city, I've noticed thast even the yellow stop lights are
> LEDs.  I believe the reason was that if the yellow lamps were left
> incandescent, then the system would still have to use AC line voltage.
> I think one thing was contemplated when they converted to LEDs, the use
> of lower power and voltage would allow the whole traffic light system
> run off backup batteries.  This was important in the last year or so
> because of the possibility of rolling blackouts in (So.) California.
> 
> --
> ----------------(from OED Mini-Dictionary)-----------------
> PUNCTUATION - Apostrophe
> Incorrect uses: (i) the apostrophe must not be used with a plural
> where there is no possessive sense, as in ~tea's are served here~;
> (ii) there is no such word as ~her's, our's, their's, your's~.
> 
> Confusions: it's = it is or it has (not 'belonging to it'); correct
> uses are ~it's here~ (= it is here); ~it's gone~ (= it has gone);
> but ~the dog wagged its tail~ (no apostrophe).
> ----------------(For the Apostrophe challenged)----------------
>  From a fully deputized officer of the Apostrophe Police!

   Here in Central Florida I see them replacing the red lights with LED
assemblies, but not the yellow or green.  I have noticed a few already
have a couple bad LEDs and haven't been in use for a full year.
-- 


Michael A. Terrell
Central Florida
Technical Details
Message-ID: <3DA319B9.76A904E6@mfi.net>
Path: arc1-ca.pugleaf.net!archiver1.google.com!news1.google.com!newsfeed.stanford.edu!news-spur1.maxwell.syr.edu!news.maxwell.syr.edu!sn-xit-03!sn-xit-06!sn-post-02!sn-post-01!supernews.com!corp.supernews.com!not-for-mail
References: <0001HW.B9C26E7400A7161B165FEAC0@news.covad.net> <3D9D3A1F.97DB97B4@prontoREMOVETHISmail.com> <slrnapvghj.hah.don@manx.misty.com> <3DA03315.9506C177@prontoREMOVETHISmail.com> <W8ao9.64063$Pz.71865@rwcrnsc51.ops.asp.att.net> <antapg$mu7t$1@hades.csu.net>

Show Full Headers
Complete Article Headers
X-Google-Language: ENGLISH,ASCII-7-bit
X-Google-Thread: 112d1e,4ef4c9d4aea85e1f
X-Google-Attributes: gid112d1e,public
X-Google-Thread: 1131b0,4ef4c9d4aea85e1f
X-Google-Attributes: gid1131b0,public
X-Google-Thread: 10d137,4ef4c9d4aea85e1f
X-Google-Attributes: gid10d137,public
X-Google-Thread: 1118be,4ef4c9d4aea85e1f
X-Google-Attributes: gid1118be,public
X-Google-Thread: 103407,4ef4c9d4aea85e1f
X-Google-Attributes: gid103407,public
X-Google-ArrivalTime: 2002-10-08 10:47:23 PST
Path: arc1-ca.pugleaf.net!archiver1.google.com!news1.google.com!newsfeed.stanford.edu!news-spur1.maxwell.syr.edu!news.maxwell.syr.edu!sn-xit-03!sn-xit-06!sn-post-02!sn-post-01!supernews.com!corp.supernews.com!not-for-mail
From: "Michael A. Terrell" <terrell@mfi.net>
Newsgroups: sci.electronics.components,sci.electronics.design,alt.engineering.electrical,aus.electronics,sci.electronics.repair
Subject: Re: Best way to power array of LEDs?
Date: Tue, 08 Oct 2002 13:45:29 -0400
Organization: Do I have to?  Well, Ok. If you insist!
Message-ID: <3DA319B9.76A904E6@mfi.net>
X-Mailer: Mozilla 4.61 [en]C-CCK-MCD   (Win95; U)
X-Accept-Language: en
MIME-Version: 1.0
References: <0001HW.B9C26E7400A7161B165FEAC0@news.covad.net> <3D9D3A1F.97DB97B4@prontoREMOVETHISmail.com> <slrnapvghj.hah.don@manx.misty.com> <3DA03315.9506C177@prontoREMOVETHISmail.com> <W8ao9.64063$Pz.71865@rwcrnsc51.ops.asp.att.net> <antapg$mu7t$1@hades.csu.net>
Content-Type: text/plain; charset=us-ascii
Content-Transfer-Encoding: 7bit
X-Complaints-To: abuse@supernews.com
Lines: 37