🚀 go-pugleaf

Joe Farrugia (JoeF@harlon.demon.co.uk) wrote:
: I need a Voltage Regulator for a Fujitsu 24 pin dot matrix printer.

: The letters/numbers on the old voltage regulator are:

: STR
: S5641
: SK3401

: Where, I think that the part number is S5641.

: Can anyone tell me where I can buy the part either new or used. I am
: situated in SW London, England.

: Any help appreciated.
: --
: Joe Farrugia, London
: E-mail: JoeF@Harlon.demon.co.uk
: http://www.geocities.com/TheTropics/2767/

Fujitsu is a big company, and international, so there is a good chance 
that they have a rep somewhere in europe if not in your country.

I've noticed that our older printers sometimes start to print characters 
that don't quite line up.  All I do is get out the can of 3-in-1 oil and 
drop a few drops of it in the glands on the printhead.  There are a 
couple of them, and they slide along the bars.  Usually fixes the 
problem for another year or two.  I remember that the old DecWriters used 
to blow the fuse when the printhead didn't slide easily along the bars. 
It could be that a lot of blown motor driver components are caused by the 
added friction from lack of oil.

--
#======P=G=P==k=e=y==a=v=a=i=l=a=b=l=e==u=p=o=n==r=e=q=u=e=s=t======#
|    John Lundgren - Elec Tech - Info Tech Svcs. |    jlundgre@     |
|    Rancho Santiago Community College District  |   deltanet.com   |
|     17th St at Bristol \ Santa Ana, CA 92706   | http://www.rancho|
| My opinions are my own, and not my employer's. |    .cc.ca.us     |
|   Most FAQs are available through Thomas Fine's WWW FAQ archive:  |
|http://www.cis.ohio-state.edu:80/hypertext/faq/usenet/FAQ-List.html|
|      "You can flame your brains out -- it won't take long."       |
#===T=u=z=l=a==C=o=m=p=a=n=y=.=.===t=h=r=e=e='=s==L=e==C=r=o=w=d=!==#