Article View: sci.electronics.components
Article #40Re: Remote control reciever question for timing of servo pulses
From: Ryan Kremser
Date: Mon, 24 Mar 2003 19:13
Date: Mon, 24 Mar 2003 19:13
19 lines
2496 bytes
2496 bytes
Ok so will these servo pulses always be the same time apart? I am trying to time the signals but only have 2 timer pins on the micro controller that i have (motorola hc08) one of them is being used for a tachometer counter and the other was going to be used for the duration of a servo output. So i'm left with one other servo signal in that i need to distinguish the time of the pulse for an on/off function for the circuit. Any suggestions are welcome. Ryan Kremser wrote: > Hello, I am working on a project using a r/c receiver connecting to a > micro controller. Part of this project requires me to time the > individual servo pulses. It would be much easier if all periods of the > pulse signal lined up with each other. Does anyone know if this timing > period starts at the same time for all servo channels or do they start > separately. Any ideas of where i could find this information? Thanks > in advance. >
Technical Details
Message-ID:
<504179e1369b67c43ef2f2d04527e682@news.teranews.com>Path:
arc1-ca.pugleaf.net!archiver1.google.com!news1.google.com!sn-xit-02!sn-xit-04!sn-xit-01!sn-xit-09!supernews.com!iad-peer.news.verio.net!news.verio.net!news.maxwell.syr.edu!newsfeed-east.nntpserver.com!nntpserver.com!news.teranews.com!not-for-mailReferences:
<561d61a429f6d6a5a14fa4118e59ee59@news.teranews.com>Show Full Headers
Complete Article Headers
X-Google-Language: ENGLISH,ASCII-7-bit X-Google-Thread: 103407,d80d0291327bb76a X-Google-Attributes: gid103407,public X-Google-Thread: 1118be,d80d0291327bb76a X-Google-Attributes: gid1118be,public X-Google-Thread: fe99a,d80d0291327bb76a X-Google-Attributes: gidfe99a,public X-Google-Thread: 105d97,d80d0291327bb76a X-Google-Attributes: gid105d97,public X-Google-Thread: 111d0a,d80d0291327bb76a X-Google-Attributes: gid111d0a,public X-Google-Thread: 107cee,d80d0291327bb76a X-Google-Attributes: gid107cee,public X-Google-ArrivalTime: 2003-03-24 11:14:21 PST X-Abuse-Report: abuse@teranews.com Message-ID: <504179e1369b67c43ef2f2d04527e682@news.teranews.com> Path: arc1-ca.pugleaf.net!archiver1.google.com!news1.google.com!sn-xit-02!sn-xit-04!sn-xit-01!sn-xit-09!supernews.com!iad-peer.news.verio.net!news.verio.net!news.maxwell.syr.edu!newsfeed-east.nntpserver.com!nntpserver.com!news.teranews.com!not-for-mail Date: Mon, 24 Mar 2003 19:13:34 GMT Lines: 20 From: Ryan Kremser <news@rkremser.endjunk.com> User-Agent: Mozilla/5.0 (Windows; U; Windows NT 5.1; en-US; rv:1.0.2) Gecko/20030208 Netscape/7.02 X-Accept-Language: en-us, en MIME-Version: 1.0 Newsgroups: sci.electronics.components,alt.electronics,aus.electronics,sci.electronics,sci.electronics.basics,sci.electronics,sci.electronics.misc Subject: Re: Remote control reciever question for timing of servo pulses References: <561d61a429f6d6a5a14fa4118e59ee59@news.teranews.com> Content-Type: text/plain; charset=us-ascii; format=flowed Content-Transfer-Encoding: 7bit