Re: Raspberry Pi EMC Testing�'s done!

Article View: sci.electronics.design

Article #181

Back to sci.electronics.design Previous Next

#181

From: Dennis
Date: Sat, 07 Apr 2012 10:56

30 lines
3016 bytes

"Chris Baird" <abuse@brushtail.apana.org.au> wrote in message 
news:ufr4w0ypva.fsf@brushtail.apana.org.au...
>>> Good news! We just received confirmation that the Raspberry Pi has
>>> passed EMC testing without requiring any hardware modifications.
>>> Full Story: http://www.raspberrypi.org/archives/978
>
> > Does anyone know under what conditions something like this device
> > would be tested??
>
> > Is code loaded to just o/p a test screen via the HDMI? Are the o/p's
> > loaded and cycled at different rates? Are all peripherals & I/O
> > exercised?
>
> You could... try reading the link.
>
> -- 
> Chris
> https://sites.google.com/site/libby8dev/fignition


Ummm yeah, I did 7 hence the question, it doesn't go into detail.

The board can be configured in almost an infinite number ways & will likely 
be hooked up to other equipment. Last time I had to do a product vaguely 
similar we "nominated" a typical configuration...

Also as an open board, what is used for the ESD discharge points? For the 
closed / housed stuff I've been involved with I think it was pretty much 
anywhere a finger could discharge onto.

Technical Details

Message-ID: <lvCdnYZKg4XKgB3SnZ2dnUVZ_s6dnZ2d@westnet.com.au>

Path:

arc1-ca.pugleaf.net!r9ni28697pbh.0!nntp.google.com!news2.google.com!news1.google.com!Xl.tags.giganews.com!border1.nntp.dca.giganews.com!nntp.giganews.com!local2.nntp.dca.giganews.com!nntp.westnet.com.au!news.westnet.com.au.POSTED!not-for-mail

References:

<9u9bd1F3k5U1@mid.individual.net><yLadnc9iJPtHIOLSnZ2dnUVZ_rmdnZ2d@westnet.com.au> <ufr4w0ypva.fsf@brushtail.apana.org.au>

Show Full Headers

Complete Article Headers

X-Google-Thread: 112d1e,12ec2bda77d052e9
X-Google-NewGroupId: yes
X-Google-Thread: 103407,12ec2bda77d052e9
X-Google-NewGroupId: yes
X-Google-Thread: f849b,12ec2bda77d052e9
X-Google-NewGroupId: yes
X-Google-Attributes: gid1617473143,gida5a6238865,gida2a404005f,domainid0,public,usenet
X-Google-Language: ENGLISH,ASCII-7-bit
Received: by 10.68.227.230 with SMTP id sd6mr1272292pbc.8.1333796185033;
        Sat, 07 Apr 2012 03:56:25 -0700 (PDT)
MIME-Version: 1.0
Path: arc1-ca.pugleaf.net!r9ni28697pbh.0!nntp.google.com!news2.google.com!news1.google.com!Xl.tags.giganews.com!border1.nntp.dca.giganews.com!nntp.giganews.com!local2.nntp.dca.giganews.com!nntp.westnet.com.au!news.westnet.com.au.POSTED!not-for-mail
NNTP-Posting-Date: Sat, 07 Apr 2012 05:56:23 -0500
From: "Dennis" <null@name.com>
Newsgroups: sci.electronics.design,aus.electronics,comp.arch.embedded
References: <9u9bd1F3k5U1@mid.individual.net><yLadnc9iJPtHIOLSnZ2dnUVZ_rmdnZ2d@westnet.com.au> <ufr4w0ypva.fsf@brushtail.apana.org.au>
Subject: Re: Raspberry Pi EMC Testing�'s done!
Date: Sat, 7 Apr 2012 18:56:22 +0800
X-Priority: 3
X-MSMail-Priority: Normal
X-Newsreader: Microsoft Outlook Express 6.00.2900.5931
X-MimeOLE: Produced By Microsoft MimeOLE V6.00.2900.6157
X-RFC2646: Format=Flowed; Original
Message-ID: <lvCdnYZKg4XKgB3SnZ2dnUVZ_s6dnZ2d@westnet.com.au>
Lines: 32
X-Usenet-Provider: http://www.giganews.com
NNTP-Posting-Host: 58.7.238.190
X-Trace: sv3-h8MtdIbP/xkSEZ4xtk4TPZrgG9z6WDqgRfYoS7PRuJBFNWAttkSQ27f3App9YdW9xUfxKJYD71JcIQ+!GCXbTQAyWOFiIQSZtdUiMYVVEXCrLZKAwyGJjNVDnCpRn+TKMko7yd8fpTKquDs74dTgRu7Th7WX!l0LRjuu1pt+RUuiMgXc=
X-Complaints-To: abuse@westnet.com.au
X-Abuse-and-DMCA-Info: Please be sure to forward a copy of ALL headers
X-Abuse-and-DMCA-Info: Otherwise we will be unable to process your complaint properly
X-Postfilter: 1.3.40
X-Original-Bytes: 2387

Reply to Parent Message