Re: Low-loss 50 Ohm coaxial cables + connectors for them?

Article View: sci.electronics.design

Article #2078

Back to sci.electronics.design Previous Next

#2078

From: Michael A. Terrell
Date: Sun, 23 Jul 2006 05:32

34 lines
2458 bytes

atec77 wrote:
> 
> Vitaliy wrote:
> > Phil Allison wrote:
> >> "Vitaliy"
> >>> Right now we are using RG58, so it's about 16dB for 100m, slashing that
> >>> by 8 dB would be good.
> >>
>   http://www.radiobooks.com/products/rf9f10.htm
>   9914 "flex" is about the best "heavy" coax you might consider
>   most 9913 is hollow and will collapse under more than minimal motion ,
> 9914 is a full foam dialectic which handles motion very well.
> 
> In a thinner material perhaps a slightly thinner rg6 quadsheild in a
> fuly spec cable  or thinner yet possibly one of the airframe
> designations from Gore
> http://www.gore.com/en_xx/products/cables/microwave/aircraft/index.html
>   A call to matchmaster (02 9153 6666) would  be in order for some
> salient advice
> 
>   Good luck


   RG6 is 75 ohms.  There is some nice low loss teflon 50 ohm coax on
the market, BTW.


-- 
Service to my country? Been there, Done that, and I've got my DD214 to
prove it.
Member of DAV #85.

Michael A. Terrell
Central Florida

Technical Details

Message-ID: <44C309B1.AB5D951D@earthlink.net>

Path:

arc1-ca.pugleaf.net!g2news2.google.com!news4.google.com!newshub.sdsu.edu!elnk-nf2-pas!newsfeed.earthlink.net!stamper.news.pas.earthlink.net!newsread1.news.pas.earthlink.net.POSTED!b1a104da!not-for-mail

References:

<1153423299.149482.91630@h48g2000cwc.googlegroups.com>   <fjc1c2d40cbjth1ni5c5trdhgalbb9vu56@4ax.com>   <1153515781.364641.262600@p79g2000cwp.googlegroups.com>   <4idcvmF385rdU1@individual.net> <1153583278.444117.300330@h48g2000cwc.googlegroups.com> <44c2d8d5@dnews.tpgi.com.au>

Show Full Headers

Complete Article Headers

X-Google-Thread: 112d1e,1bfed7534c4b990c
X-Google-Thread: 103407,1bfed7534c4b990c
X-Google-Attributes: gid112d1e,gid103407,public
X-Google-Language: ENGLISH,ASCII-7-bit
Path: arc1-ca.pugleaf.net!g2news2.google.com!news4.google.com!newshub.sdsu.edu!elnk-nf2-pas!newsfeed.earthlink.net!stamper.news.pas.earthlink.net!newsread1.news.pas.earthlink.net.POSTED!b1a104da!not-for-mail
Message-ID: <44C309B1.AB5D951D@earthlink.net>
From: "Michael A. Terrell" <mike.terrell@earthlink.net>
Reply-To: mike.terrell@earthlink.net
Organization: http://home.earthlink.net/~mike.terrell/
X-Mailer: Mozilla 4.78 [en]C-CCK-MCD   (Win98; U)
X-Accept-Language: en
MIME-Version: 1.0
Newsgroups: sci.electronics.design,aus.electronics
Subject: Re: Low-loss 50 Ohm coaxial cables + connectors for them?
References: <1153423299.149482.91630@h48g2000cwc.googlegroups.com>   <fjc1c2d40cbjth1ni5c5trdhgalbb9vu56@4ax.com>   <1153515781.364641.262600@p79g2000cwp.googlegroups.com>   <4idcvmF385rdU1@individual.net> <1153583278.444117.300330@h48g2000cwc.googlegroups.com> <44c2d8d5@dnews.tpgi.com.au>
Content-Type: text/plain; charset=us-ascii
Content-Transfer-Encoding: 7bit
Lines: 34
Date: Sun, 23 Jul 2006 05:32:16 GMT
NNTP-Posting-Host: 24.110.34.161
X-Complaints-To: abuse@earthlink.net
X-Trace: newsread1.news.pas.earthlink.net 1153632736 24.110.34.161 (Sat, 22 Jul 2006 22:32:16 PDT)
NNTP-Posting-Date: Sat, 22 Jul 2006 22:32:16 PDT

Reply to Parent Message