🚀 go-pugleaf

On Sun, 13 Nov 2011 11:40:09 -0800 (PST), KORISNIK <tehit1@gmail.com>
wrote:

>On Nov 13, 8:59�am, Jeff Liebermann <je...@cruzio.com> wrote:
>> On Sat, 12 Nov 2011 14:43:08 -0800 (PST),KORISNIK<teh...@gmail.com>
>> wrote:
>>
>> >if you do not get an option to start it in the menu with options f1 go
>> >to bios,f12 select temp boot device
>> >does that mean it has been ran over(although with undelete program you
>> >can see the pre desktop folders)
>> >or perhaps inside thebios selecting secure, or disabled instead of
>> >Normal for acess to the predesktop partition would change things?(what
>> >do those terms mean anyway-bios says:secure=no change,normal=hidden
>> >form os,changeok,disabled=not usable.not hidden(reclaimable)?
>>
>> I think you might find it useful to disclose the exact model number of
>> your laptop. �Not all IBM Thinkpads are the same. �It might also be
>> helpful if you would disclose what you're trying to accomplish.
>> <http://www.thinkwiki.org>
>>
>> --
>> Jeff Liebermann � � je...@cruzio.com
>> 150 Felker St #D � �http://www.LearnByDestroying.com
>> Santa Cruz CA 95060http://802.11junk.com
>> Skype: JeffLiebermann � � AE6KS � �831-336-2558
>
>restore from t43 predesktop is the goal bur how do you start it
>or at least make a bootable dvd out of it ;
>also following bios predesktop settings are confusing
>secure=no change,(AND HIDDEN?)
>normal=hidden from os,changeOk(YOU NEED SOME SPECIAL PROG TO CHANGE
>IT?)
>disabled=not usable.visible and reclaimable(FIRST TIME BOOT TO OS WILL
>START OVERWRITTING IT)?
>
You can hide/unhide a partition with any partition manager.  I use
GParted.
<http://gparted.sourceforge.net>

To recover your T43, see:
<http://www.thinkwiki.org/wiki/How_to_recover_the_preloaded_OS>
<http://www.thinkwiki.org/wiki/Rescue_and_Recovery>

If you wish to preserve the data on the hard disk, I would advise you
to make an IMAGE backup of your hard disk before proceeding.  I use
Acronis True Image 2011, but there are free versions that should work.
If you make a mistake, restore the image and try again.

Also, it might be helpful if you would supply the name of the
operating system you're trying to recover.


-- 
Jeff Liebermann     jeffl@cruzio.com
150 Felker St #D    http://www.LearnByDestroying.com
Santa Cruz CA 95060 http://802.11junk.com
Skype: JeffLiebermann     AE6KS    831-336-2558