🚀 go-pugleaf

Franc Zabkar <fzabkar@iinternode.on.net> wrote in message
news:t3qr855hpfsem99a9m1bc819hop6easg70@4ax.com...
> My father gave me his gold watch, a 25 year old Omega analogue quartz.
> It had been lying idle in his drawer with the time-setting pin
> disengaged. After re-engaging the pin, the hands began advancing at 4
> times the normal rate. After 1 hour it has gained 3 hours. I assume
> the crystal is oscillating at a higher overtone, maybe due to a weak
> battery.
>
> In any case I now have a watch to match the reverse Dick Smith wall
> clock above my desk. Maybe I should start collecting misbehaving
> timepieces.
>
> - Franc Zabkar
> --
> Please remove one 'i' from my address when replying by email.

I (in the UK) once had to repair a bedside clock radio that was running hot
and running slow. It was actually made for the USA and 110V / 60Hz that
someone had put a UK plug on the mains cable. Not burnt up running at 240V
but the 50Hz meant it was losing exactly 10 minutes an hour.

My local has a few disguised clocks including a reverse one. I though about
making one with a pointy-tooth eliptical gear and axially sprung loaded
conical pinion so it would run alternately fast and slow each hour.
There is a church near me that has a clock in the tower that is so old that
it has only one hand, other not dropped off, minutes weren't needed prior to
the railways coming in.


--
Diverse Devices, Southampton, England
electronic hints and repair briefs , schematics/manuals list on
http://home.graffiti.net/diverse:graffiti.net/