🚀 go-pugleaf

Thanks for the info as I couln't find who makes these tvs;
I will follow up for a schematic with DSE but in the meantime I would
like to know if the voltage at the collector of the HOT for these
portable 12v tvs in general should be 110-130 as the bigger ones. (I
have measured 10.84 volts which is coming straight from the FBT.
Thanks A.T.




Franc Zabkar <fzabkar@optussnet.com.au> wrote in message news:<9klr61hqkiraomt6d6ubdkvthsunasm2h8@4ax.com>...
> On 25 Apr 2005 01:42:03 -0700, "alitonto" <alitonto@hotmail.com> put
> finger to keyboard and composed:
> 
> 
> >Anyone got schematics on this TV can they please tell me where the
> >drive to this HOT should be coming from. (Eg. a transistor or IC etc.)
> >It will make this easier.
> 
> Have you tried contacting Dick Smith spare parts for a service manual?
> 
>  Phone:   1300 660 054
>  Email:   service at dse dot com dot au
>           spares at dse dot com dot au
> 
> Otherwise post the part numbers of the major ICs. Someone may be able
> to locate a datasheet with an application diagram that matches your
> set. I'd be looking for a multi-pin jungle IC, eg 40-pin or 64-pin.
> 
> 
> - Franc Zabkar