Article View: sci.electronics
Article #10289Re: power amp
From: Jim Smith
Date: Tue, 19 Feb 1991 21:55
Date: Tue, 19 Feb 1991 21:55
12 lines
929 bytes
929 bytes
Bert Knol writes: ==== At work I have been given the task to design and build a power amplifier with roughly the following specs: output power 5000W av. during 10 ms, =load 50 ohm resistive, off-time 1.99 s, -3dB bandwidth: 38 kHz +- 5 kHz, ===linear mode, solid state, mains powered (240 V/ 50 Hz). ==== This would also be a good solution for the earlier poster who wanted to mess up his neighbor's stereo. :-) (at sci.electronics.frivolity)
Technical Details
Message-ID:
<1840037@hpsad.HP.COM>Path:
arc1-ca.pugleaf.net!utzoo!utgpu!news-server.csri.toronto.edu!bonnie.concordia.ca!thunder.mcrcim.mcgill.edu!snorkelwacker.mit.edu!shelby!agate!bionet!uwm.edu!caen!sdd.hp.com!hplabs!hpl-opus!hpnmdla!hpsad!smithjReferences:
<853@frc.frc.maf.govt.nz>Show Full Headers
Complete Article Headers
Path: arc1-ca.pugleaf.net!utzoo!utgpu!news-server.csri.toronto.edu!bonnie.concordia.ca!thunder.mcrcim.mcgill.edu!snorkelwacker.mit.edu!shelby!agate!bionet!uwm.edu!caen!sdd.hp.com!hplabs!hpl-opus!hpnmdla!hpsad!smithj From: smithj@hpsad.HP.COM (Jim Smith) Newsgroups: sci.electronics Subject: Re: power amp Message-ID: <1840037@hpsad.HP.COM> Date: 19 Feb 91 21:55:38 GMT References: <853@frc.frc.maf.govt.nz> Organization: HP Signal Analysis Division - Rohnert Park, CA Lines: 12