Article View: sci.electronics
Article #10322Re: Prototype quantity PCB manufacturing
From: Reid Trimble
Date: Tue, 19 Feb 1991 19:57
Date: Tue, 19 Feb 1991 19:57
11 lines
1067 bytes
1067 bytes
> MEHARP01@ulkyvx.BITNET (Michael Harpe) / 11:52 am Feb 15, 1991 / > Where does one go when he needs a "small" quantity of PC boards made up? I'm > talking about small, double-sided boards, not multi-layer 12" X 12" NeXT > machine boards :-). I know there must be a place than can do this. I am > working on a project that will need a PC board (uses DRAMs and other high > speed circuitry) so i'd like to know what this will cost and whether it's > feasible at all. ----------- Did you try your local yellow pages? My Denver phone book lists over 30 places under "Printed & Etched Circuits" that would seem to fit your requirements exactly.
Technical Details
Message-ID:
<2610002@hplvec.LVLD.HP.COM>Path:
arc1-ca.pugleaf.net!utzoo!utgpu!news-server.csri.toronto.edu!cs.utexas.edu!sdd.hp.com!hplabs!hpfcso!hplvec!reidReferences:
<BBAB40901B5FA00F7D@ulkyvx.bitnet>Show Full Headers
Complete Article Headers
Path: arc1-ca.pugleaf.net!utzoo!utgpu!news-server.csri.toronto.edu!cs.utexas.edu!sdd.hp.com!hplabs!hpfcso!hplvec!reid From: reid@hplvec.LVLD.HP.COM (Reid Trimble) Newsgroups: sci.electronics Subject: Re: Prototype quantity PCB manufacturing Message-ID: <2610002@hplvec.LVLD.HP.COM> Date: 19 Feb 91 19:57:41 GMT References: <BBAB40901B5FA00F7D@ulkyvx.bitnet> Organization: Hewlett-Packard Co., Loveland, CO Lines: 11