🚀 go-pugleaf

in article <7116@tekred.CNA.TEK.COM>, tonyo@tekred.CNA.TEK.COM (Tony Ozrelic) says:
> Instead of trying to drive the output of the car radio amplifiers, try
> this: grab the preamp inputs at the volume control and feed your audio in
> from there. Now you can change the volume by tweaking the radio's control,
> instead of the Walkman's. Works for any radio. Obligatory Bad Schematic:

True, but without a circuit diagram and an easy-to-get-to PCB in the radio,
it may be difficult to do this.  Certainly the PCB in my radio wasn't
designed to be got at (mechanically or electrically!).  Output stages are
usually separate, hence easier to get at.

Actually, with my scheme the radio volume knob *does* adjust the Walkman
sound level as turning up the radio volume pot reduces the resistive 
divide-by ratio I used to cut down the Walkman signal level.  Not as neat, 
but still effective.

-- 
Brendan Jones  | ACSnet:  brendan@otc.otca.oz.au               | What does
R&D Contractor |   UUCP:  {uunet,mcvax}!otc.otca.oz.au!brendan | your
Services R&D   |  Phone:  (02)2873128     Fax:  (02)2873299    | company
|||| OTC ||    |  Snail:  GPO Box 7000 Sydney 2001, AUSTRALIA  | export?