🚀 go-pugleaf

I'm posting this here only because of the interests of this group...

I'm down to two supplies of the surplus lot I obtained (besides
the ones I kept :-)  ).

The following are all regulated lab supplies with metered and controlled
voltage and current (CVCC).  All have remote sensing capability.
All work. All are DC supplies, in rack-mountable (except the Lambda)
bench cases, and run from 115 volts. Shipping additional...

Voltage	Current  Model/ Manufacturer		Comments	Price

0-40v	0-4A	  Lambda LH122FM1928-1 		Half-rack size	$75

0-60v	0-3A	  HP/Harrison Labs 6271				$75

I also have a non-working Behlman 0-36 volt 0-10 amp supply, variac
pre-regulated, transistor post-regulated, that does not work. It has a
working 1 kW variac and a 110 to 45 VCT 12 amp transformer in it. I'd
sell it for $30--you can repair it (I think but am not sure it is a
capacitor failure), build up your own regulator section or simply use
the variac and make a variable AC supply out of it. That's about 1/4
the cost of a new variac alone.

I have two rack mount collars for Lambda half-rack supplies I'd
sell for $10 each , or include one free if you get the Lambda supply
above.

E-mail if interested. While I do not deal in surplus (I simply buy lots
to get things I want for my lab and sell the excess), I'm willing
to keep my eyes open for what you might need--let me know.

-- 
--------------------------------------------------------------------
       Dave Medin			Phone:	(205) 730-3169 (w)
    Intergraph Corp.				(205) 837-1174 (h)
       M/S GD3004
  Huntsville, AL 35894 		Internet: medin@catbyte.b30.ingr.com
				UUCP:  ...uunet!ingr!b30!catbyte!medin

   ******* Everywhere You Look (at least around my office) *******

 * The opinions expressed here are mine (or those of my machine)