🚀 go-pugleaf

RetroBBS NetNews Server

Inspired by RockSolid Light RIP Retro Guy

Article View: sci.electronics
Article #1099

Re: Re: Touching a "hot" connector

#1099
From: John Eaton
Date: Sun, 06 Aug 1989 21:45
20 lines
999 bytes
<<<
< Does anyone know what would happen if one inadvertently, one rainy
< night, with wet feet, pissed onto an electric fence?
-- 
No and we don't want you to field test this either.

I started in electronics when tubes were still around and equipment
had decent voltages in them. I can still remember two of the basic
saftey rules:

  Never touch a conductor to see if it is live.


   If you know a conducter is dead then first touch it with the back
   of your hand so if you are wrong your hand will contract away from
   the source rather than grabbing onto it.


John Eaton
!hpvcfs1!johne
Technical Details
Message-ID: <1430005@hpvcfs1.HP.COM>
Path: arc1-ca.pugleaf.net!utzoo!utgpu!jarvis.csri.toronto.edu!mailrus!tut.cis.ohio-state.edu!ucbvax!hplabs!hp-pcd!hpvcfs1!johne
References: <427@edai.ed.ac.uk>

Show Full Headers
Complete Article Headers
Path: arc1-ca.pugleaf.net!utzoo!utgpu!jarvis.csri.toronto.edu!mailrus!tut.cis.ohio-state.edu!ucbvax!hplabs!hp-pcd!hpvcfs1!johne
From: johne@hpvcfs1.HP.COM (John Eaton)
Newsgroups: sci.electronics
Subject: Re: Re: Touching a "hot" connector
Message-ID: <1430005@hpvcfs1.HP.COM>
Date: 6 Aug 89 21:45:15 GMT
References: <427@edai.ed.ac.uk>
Organization: Hewlett Packard, Vancouver, WA
Lines: 20