🚀 go-pugleaf

In article <Bw0MoI.AMB@gpu.utcs.utoronto.ca> darek@gpu.utcs.utoronto.ca (Darek Dabrowski) writes:
>I need the pins that are used for null modem cable. (serial port..)
>
>
>	there are 25 pins which should be connected and how ???
>
>	1 . . . . 5 . . . . 1 . . . . 5 . . . . 2 . . . . 5
>
>
>	1 . . . . 5 . . . . 1 . . . . 5 . . . . 2 . . . . 5
>
>I know that pin 3 should be connected to 4 and 6 & 8 to 20 but 
>this doesn't work... I want to connect XT with 486 could this be a problem ??


I dunno but this is the way I think it is supposed to be for a proper null
modem cable with out disabling your rts and cts and all them goodies :)


2 goes to the other 3
3 goes to the other 2
4 goes to the other 5
5 goes to the other 4
7 goes to the other 7
8 goes to the other 20
20 goes to the other 7

This one should work but it is not guarranted to work for a sure thing
but you lose the auto hang up and things you can try....

2 goes to the other 3
3 goes to the other 2
4 jumpered to 5 on  both sides  (as in on the same end of the cable)
6 jumpered to 8 jumpered to 20 also on both sides
7 goes to the other 7 

and well if these dont work give up like I do and call someone *grin*



-- 
ziggy@r-node.pci.on.ca  <--- New and impoved fastest route :) USE IT!!
ziggy@r-node.gts.org         | Have you rubbed noses with an Eskimo today??
ziggy@zooid.guild.org        | My inability to spell and gramatize are no
adrian@skypod.guild.org      | reflection on the GENERAL CANADIAN intelligence!!