Article View: sci.electronics
Article #11570Re: RFI/EMI shielding of a plastic box
From: Ed Hare - KA1CV
Date: Tue, 13 Oct 1992 13:45
Date: Tue, 13 Oct 1992 13:45
25 lines
1164 bytes
1164 bytes
One good way to shield a plastic box is with conductive paint. One source of this is: GC-Thorensen catalog # 10-4807 1801 Morgan St POB 1209 Rockford IL 61102-1209 815-968-9661 I have one caution -- make sure the surface is clean and that the paint will stick well! If the paint flakes off, the conductive flakes will wreak much havoc in the circuit they are trying to shield! 73 from ARRL HQ, Ed ----- Ed Hare, KA1CV ehare@arrl.org American Radio Relay League 225 Main St. Newington, CT 06111 There is no limit to what you can (203) 666-1541 - voice accomplish if you don't care who ARRL Laboratory Supervisor gets the credit. - Harry S Truman RFI, xmtr and rcvr testing -----
Technical Details
Message-ID:
<622@arrl.org>Path:
arc1-ca.pugleaf.net!sparky!uunet!pmafire!mica.inel.gov!ux1!fcom.cc.utah.edu!hellgate.utah.edu!cs.utexas.edu!zaphod.mps.ohio-state.edu!rpi!newsserver.pixel.kodak.com!psinntp!psinntp!arrl.orgShow Full Headers
Complete Article Headers
Path: arc1-ca.pugleaf.net!sparky!uunet!pmafire!mica.inel.gov!ux1!fcom.cc.utah.edu!hellgate.utah.edu!cs.utexas.edu!zaphod.mps.ohio-state.edu!rpi!newsserver.pixel.kodak.com!psinntp!psinntp!arrl.org From: ehare@arrl.org (Ed Hare - KA1CV) Newsgroups: sci.electronics Subject: Re: RFI/EMI shielding of a plastic box Message-ID: <622@arrl.org> Date: 13 Oct 92 09:45:37 EDT Organization: American Radio Relay League Lines: 25