Re: volts to digital display (?)

Article View: sci.electronics

Article #11588

#11588

From: Willie Smith
Date: Wed, 14 Oct 1992 17:54

14 lines
1074 bytes

In article <1992Oct07.133456.16269@ncrcae.ColumbiaSC.NCR.COM> chris@lightnin.Columbia.NCR.COM writes:
>
>  I am interested in finding a chip that will convert an analog
>voltage to a digital readout.  I will be monitoring less than 10v
>so the display need only be "X.XX" type resolution.                   

How about a device called a Digital Volt Meter?  You can get a DVM
from anywhere from Radio Shack on up, from $20 on up.  Digi-Key and
others have Digital Panel Meters you can fiddle with too, but they
tend to be more expensive than handheld DVMs due to volume of the
demand for them...

Willie Smith
wpns@pictel.com

Technical Details

Message-ID: <1992Oct14.175400.5588@miki.pictel.com>

Path: arc1-ca.pugleaf.net!sparky!uunet!ogicse!uwm.edu!news.bbn.com!noc.near.net!gateway!miki!wpns

References: <1992Oct07.133456.16269@ncrcae.ColumbiaSC.NCR.COM>

Show Full Headers

Complete Article Headers

Path: arc1-ca.pugleaf.net!sparky!uunet!ogicse!uwm.edu!news.bbn.com!noc.near.net!gateway!miki!wpns
From: wpns@miki.pictel.com (Willie Smith)
Newsgroups: sci.electronics
Subject: Re: volts to digital display (?)
Message-ID: <1992Oct14.175400.5588@miki.pictel.com>
Date: 14 Oct 92 17:54:00 GMT
Article-I.D.: miki.1992Oct14.175400.5588
References: <1992Oct07.133456.16269@ncrcae.ColumbiaSC.NCR.COM>
Organization: PictureTel Corporation
Lines: 14

Reply to Parent Message