Article View: sci.electronics
Article #11768Remote power supply control
From: Thomas Brown
Date: Mon, 05 Oct 1992 20:19
Date: Mon, 05 Oct 1992 20:19
16 lines
1126 bytes
1126 bytes
Can anyone offer advice on the best way to control a DC power supply (0-15 volt range) using the "REMOTE" leads on the rear of the unit? Most supplies with "REMOTE" voltage control want to see a varied resistance across two terminals (from the voltage output through a varied resistance to the "REMOTE" input). I am looking for a way to replace the resistor with a variable voltage input from, say, a D->A convertor or other external voltage source. Thanks much, -Tom -- --=-- Thomas Brown, KA2UGQ Internet: twb0@lehigh.edu Lehigh University UC Box 855 UUCP: ..!uunet!lehigh.edu!twb0 Bethlehem, PA 18015 AX.25: ka2ugq@ka2ugq.nj.usa.na
Technical Details
Message-ID:
<1992Oct5.201905.35305@ns1.cc.lehigh.edu>Path:
arc1-ca.pugleaf.net!sparky!uunet!tcsi.com!iat.holonet.net!news!usc!elroy.jpl.nasa.gov!sdd.hp.com!caen!uwm.edu!ogicse!orstcs!rutgers!netnews.upenn.edu!netnews.cc.lehigh.edu!ns1.cc.lehigh.edu!twb0Show Full Headers
Complete Article Headers
Path: arc1-ca.pugleaf.net!sparky!uunet!tcsi.com!iat.holonet.net!news!usc!elroy.jpl.nasa.gov!sdd.hp.com!caen!uwm.edu!ogicse!orstcs!rutgers!netnews.upenn.edu!netnews.cc.lehigh.edu!ns1.cc.lehigh.edu!twb0 From: twb0@ns1.cc.lehigh.edu (Thomas Brown) Newsgroups: sci.electronics Subject: Remote power supply control Message-ID: <1992Oct5.201905.35305@ns1.cc.lehigh.edu> Date: 5 Oct 92 20:19:05 GMT Organization: Lehigh University Lines: 16 X-Newsreader: Tin 1.1 PL5