Article View: sci.electronics
Article #11822VCR / TAPE Problems --- HELP !!!
From: Remek Lipinski
Date: Thu, 12 Nov 1992 22:44
Date: Thu, 12 Nov 1992 22:44
33 lines
2471 bytes
2471 bytes
Hello Netters, I have a bit of a broblem with my VCR, although I do not know if the problem is with the VCR ot the tapes. I recenly purchased a SVHS Panasonic VCR and a couple of months down the track it started recording with such a large ammont of noise there was almost no picture left (PANIC). I took it to a service centre and described the problem to them, and they agreed to take a look. In the mean time (during the time that my new VCR was being serviced), my other VCR (an old model Sharp) which has been very reliable over the years, develop an identical problem. Coincidence? I did not think so. So I opened it up and found a lot of tape material on the head, and after cleaning it everything was back to normal. I then traced the tapes most likely responsible (as they were the only ones I was using during that time), and found that it was my brand new TDK EHG tapes which I purchased in a 2 pack. This led me to think that perhaps TDK made a bad batch (as this is the first problem that I had with TDKs), so I noted the batch code to make sure I do not get tapes from that batch. My new VCR came back and the service person told me that there was nothing wrong with it and that he cleaned the heads anyway. Relieved I thought that my problem was solved. However, yersterday it returned, and I am using TDK tapes with a different batch code. What I would like to desperately find out is whether it is likely that TDK is making a lot of faulty tapes lately, or is it possible that my new VCR somehow manages to lossen the surface of the tape so that magnetic material is able to come off (as this would explain the same problem with my older VCR). Please, any feedback would be grately appreciater. Thanks in advance, Remek. =============================================================================== ** Remek Lipinski : remek@mullian.ee.mu.OZ.AU ** ** "I'll be back!" - T800 ** ===============================================================================
Technical Details
Message-ID:
<9231809.8418@mulga.cs.mu.OZ.AU>Path:
arc1-ca.pugleaf.net!sparky!uunet!munnari.oz.au!cs.mu.OZ.AU!mamura!remekShow Full Headers
Complete Article Headers
Newsgroups: sci.electronics Path: arc1-ca.pugleaf.net!sparky!uunet!munnari.oz.au!cs.mu.OZ.AU!mamura!remek From: remek@mamura.ee.mu.oz.au (Remek Lipinski) Subject: VCR / TAPE Problems --- HELP !!! Message-ID: <9231809.8418@mulga.cs.mu.OZ.AU> Sender: news@cs.mu.OZ.AU Organization: Electrical and Electronic - University of Melbourne Date: Thu, 12 Nov 1992 22:44:48 GMT Lines: 33