Article View: sci.electronics
Article #11920Wirewrap proto with 18x18 PGA
From: Carl F. Diegert
Date: Thu, 15 Oct 1992 23:04
Date: Thu, 15 Oct 1992 23:04
9 lines
851 bytes
851 bytes
We need a better solution for wire-wrapped prototypes using 18 by 18 PGA parts. Without a ZIF socket, you have to stand on these things. The only ZIF we have found, however, has pins too short and small for our prototype, and too thin to plug into a standard, non-ZIF wirewrap socket. .. there must be a solution .. thanks in advance for any help!
Technical Details
Message-ID:
<1992Oct15.230446.3085@cs.sandia.gov>Path:
arc1-ca.pugleaf.net!sparky!uunet!know!hri.com!ukma!darwin.sura.net!zaphod.mps.ohio-state.edu!uakari.primate.wisc.edu!unmvax!cs.sandia.gov!diegertShow Full Headers
Complete Article Headers
Path: arc1-ca.pugleaf.net!sparky!uunet!know!hri.com!ukma!darwin.sura.net!zaphod.mps.ohio-state.edu!uakari.primate.wisc.edu!unmvax!cs.sandia.gov!diegert From: diegert@cs.sandia.gov (Carl F. Diegert) Newsgroups: sci.electronics Subject: Wirewrap proto with 18x18 PGA Message-ID: <1992Oct15.230446.3085@cs.sandia.gov> Date: 15 Oct 92 23:04:46 GMT Sender: usenet@cs.sandia.gov (Another name for news) Organization: Sandia National Laboratories, Albuquerque, NM Lines: 9 Originator: diegert@cs.sandia.gov