Article View: sci.electronics
Article #1359Re: Re^2: Through-plating PCB's
From: Vince Pavlicek
Date: Wed, 30 Aug 1989 02:53
Date: Wed, 30 Aug 1989 02:53
19 lines
1350 bytes
1350 bytes
In article <6684@stiatl.UUCP> john@stiatl.UUCP (John DeArmond) writes:
>Back to the point..
>
>While the process is somewhat tedious and particular regarding chemistry
>control, it is well within the capabilities a well-equipped prototype
>or hobby shop. Kepro, among others, sells desktop equipment and chemicals.
>Check your EEG or EBG for an address or phone.
>
Last etcher we bought from Keppro (smallest one they make)
was over $600!!! Thru plating is tedious, chemically particular and
expensive unless you are doing a lot of boards. We do 10 to 30 double-
sided, non-plated-thru-hole prototypes a year and go outside for production.
0
O vince pavlicek
o development engineer
marine physical lab
u.c. san diego vince@mplvax.ucsd.edu || vince@mplvax.nosc.mil
Technical Details
Message-ID:
<993@mplvax.EDU>Path:
arc1-ca.pugleaf.net!utzoo!utgpu!jarvis.csri.toronto.edu!mailrus!ames!sun-barr!apple!usc!ucsd!sdcc6!mplvax!vinceReferences:
<4003@csd4.csd.uwm.edu> <10040019@hprmokg.HP.COM> <6684@stiatl.UUCP>Show Full Headers
Complete Article Headers
Path: arc1-ca.pugleaf.net!utzoo!utgpu!jarvis.csri.toronto.edu!mailrus!ames!sun-barr!apple!usc!ucsd!sdcc6!mplvax!vince From: vince@mplvax.EDU (Vince Pavlicek) Newsgroups: sci.electronics Subject: Re: Re^2: Through-plating PCB's Message-ID: <993@mplvax.EDU> Date: 30 Aug 89 02:53:48 GMT References: <4003@csd4.csd.uwm.edu> <10040019@hprmokg.HP.COM> <6684@stiatl.UUCP> Reply-To: vince@mplvax.ucsd.edu.UUCP (Vince Pavlicek) Organization: U.C. San Diego, Marine Physical Laboratory Lines: 19