Article View: sci.electronics
Article #1382Re: Through-plating PCB's
From: John Sparks
Date: Fri, 01 Sep 1989 13:56
Date: Fri, 01 Sep 1989 13:56
35 lines
1768 bytes
1768 bytes
<6684@stiatl.UUCP>
Sender:
Reply-To: sparks@corpane.UUCP (John Sparks)
Followup-To:
Distribution:
Organization: Corpane Industries, Inc.
Keywords:
We have a circuit board repair kit here at work (brand name is PACE)
and it has feed-thru repair pieces.
Basically you drill out the feed thru and replace it with this two part feed
thru made of tin. It's basically like a rivet. I will attempt to draw a side
view:
___________
*************|| ||***********
************* | | ***********
---------
The **** is the board. The two pieces fit together thru the hole and you use
a special tool to press fit them together.
I assume that instead of using this method to repair boards you could use it
to make feed thrus that look pretty professional on boards that you make.
--
John Sparks | {rutgers|uunet}!ukma!corpane!sparks | D.I.S.K. 24hrs 1200bps
||||||||||||||| sparks@corpane.UUCP | 502/968-5401 thru -5406
Lead me not into temptation. I can find it myself.
Technical Details
Message-ID:
<1000@corpane.UUCP>Path:
arc1-ca.pugleaf.net!utzoo!attcan!utgpu!jarvis.csri.toronto.edu!mailrus!csd4.csd.uwm.edu!uakari.primate.wisc.edu!ames!ncar!asuvax!mcdphx!mcdchg!ddsw1!corpane!sparksReferences:
<4003@csd4.csd.uwm.edu> <10040019@hprmokg.HP.COM>Show Full Headers
Complete Article Headers
Path: arc1-ca.pugleaf.net!utzoo!attcan!utgpu!jarvis.csri.toronto.edu!mailrus!csd4.csd.uwm.edu!uakari.primate.wisc.edu!ames!ncar!asuvax!mcdphx!mcdchg!ddsw1!corpane!sparks From: sparks@corpane.UUCP (John Sparks) Newsgroups: sci.electronics Subject: Re: Through-plating PCB's Message-ID: <1000@corpane.UUCP> Date: 1 Sep 89 13:56:45 GMT References: <4003@csd4.csd.uwm.edu> <10040019@hprmokg.HP.COM> Organization: Corpane Industries, Inc., Louisville Ky Lines: 35