request for recommendations for IBM PC/AT DSP boards

Article View: sci.electronics

Article #1437

#1437

From: Bill Warner
Date: Fri, 08 Sep 1989 18:36

27 lines
1380 bytes

I'm looking to purchase DSP and data acquisition hardware for 
use in an IBM PC/AT.  I have already found several companies
that market boards suitable to my needs, but I'm sure there
must be more.  Can anyone recommend a product(s) that meets
my requirements (see below)?

Please respond by e-mail to  billw@datacom.ee.ubc.ca   and include, 
if possible, approximate cost, product specifications, sales
contact, etc...

DSP requirements:
    - based on Motorola 56001
    - minimum 96K * 24  RAM (0 wait state)
    - interface to PC host
    - software support 

Data Acquisition requirements:
    - 1 channel in, 1 channel out, simultaneous operation
    - 50KHz sampling and reconstruction rate            
    - 12 bit resolution (linear)
    - data transfer direct to DSP memory (not through PC host)


Thanks for any and all information!


Bill Warner - Electrical Engineering, University of British Columbia

Technical Details

Message-ID: <480@fs1.ee.ubc.ca>

Path:

arc1-ca.pugleaf.net!utzoo!utgpu!jarvis.csri.toronto.edu!rutgers!apple!brutus.cs.uiuc.edu!wuarchive!udel!rochester!cornell!uw-beaver!ubc-cs!fs1!com2.ee.ubc.ca!billw

Show Full Headers

Complete Article Headers

Path: arc1-ca.pugleaf.net!utzoo!utgpu!jarvis.csri.toronto.edu!rutgers!apple!brutus.cs.uiuc.edu!wuarchive!udel!rochester!cornell!uw-beaver!ubc-cs!fs1!com2.ee.ubc.ca!billw
From: billw@com2.ee.ubc.ca (Bill Warner)
Newsgroups: sci.electronics
Subject: request for recommendations for IBM PC/AT DSP boards
Keywords: DSP data acquisition
Message-ID: <480@fs1.ee.ubc.ca>
Date: 8 Sep 89 18:36:06 GMT
Sender: news@fs1.ee.ubc.ca
Distribution: na
Lines: 27