🚀 go-pugleaf

    I've got a number of requests for the info on how to get PADS to
install, so here it is.  Any problems with this, just let me know.

                                        Ryan Miller
                                        jmce+@andrew.cmu.edu

------
PADS logic and PADS pcb manual installation

        Many people have had trouble running the install program for
these programs.  Then you must install the programs manually as follows:

1)      You need these files:           PADSPCB.ZIP
                                        PADSLOG.ZIP
                                        PADSLIB.ZIP

        make the directory:             /PADSDEMO

        unzip PADSLOG.ZIP into the \PADSDEMO directory, and copy the
file files.exe to logfiles.exe.  Then unzip the other two into
\PADSDEMO.

2)      Make the following directories: /PADSDEMO/LOGFIL
                                        /PADSDEMO/FILES
                                        /PADSDEMO/LIB
                                        /PADSDEMO/CAM

3)      Move the following files:
        \PADSDEMO\LIB.EXE       ->      \PADSDEMO\LIB\LIB.EXE
        \PADSDEMO\ULIB.EXE      ->      \PADSDEMO\LIB\ULIB.EXE
        \PADSDEMO\FILES.EXE     ->      \PADSDEMO\FILES\FILES.EXE
        \PADSDEMO\LOGFIL.EXE    ->      \PADSDEMO\LOGFIL\LOGFIL.EXE

4)      Execute the following files (they are self extracting):
                \PADSDEMO\PADS.EXE
                \PADSDEMO\DHLP.EXE
                \PADSDEMO\LOGIC.EXE
                \PADSDEMO\LIB\LIB.EXE
                \PADSDEMO\LIB\ULIB.EXE
                \PADSDEMO\FILES\FILES.EXE
                \PADSDEMO\LOGFIL\LOGFIL.EXE

5)      Okay, the program installation is done.  You must do hardware
setup still.  Goto the \PADSDEMO directory and run pinstall.

        That should be it.  I hope this helps.  Let me know if you have
any problems.

                                                Ryan Miller
                                                jmce+@andrew.cmu.edu