MC68HC11 Eprom's

Article View: sci.electronics

Article #15137

#15137

From: Andrew Herdman
Date: Wed, 23 Dec 1992 04:32

15 lines
1062 bytes

I've been reading the MC68HC11A8 Technical Data and MC68HC11 Reference
Manual, and can't seem to find how to program the Internal Eprom in the
7xx series.  They go to great details on how to program the EEPROM, but
completely skip the EPROM.  I know some can be programed with a
programmer board but I'm looking for a way to d/l a program into
internal ram from the serial port, and then have my program program the
EPROM.  Any Ideas?  It's not the same as the EEPROM is it?

Andrew

-- 
#############################################################################
apollo@r-node.gts.org - no email exceeding 15k each and 30k daily

apollo@r-node.pci.on.ca  - faster route, but above applies

Technical Details

Message-ID: <1992Dec23.043212.2775@r-node.gts.org>

Path: arc1-ca.pugleaf.net!sparky!uunet!zaphod.mps.ohio-state.edu!rpi!utcsri!geac!r-node!apollo

Show Full Headers

Complete Article Headers

Newsgroups: sci.electronics
Path: arc1-ca.pugleaf.net!sparky!uunet!zaphod.mps.ohio-state.edu!rpi!utcsri!geac!r-node!apollo
From: apollo@r-node.gts.org (Andrew Herdman)
Subject: MC68HC11 Eprom's
Message-ID: <1992Dec23.043212.2775@r-node.gts.org>
Organization: R-node Public Access UNIX Information System (416-249-5366)
Date: Wed, 23 Dec 1992 04:32:12 GMT
Lines: 15