Re: Speakers loose tweeters and filter elements

Article View: sci.electronics

Article #15152

#15152

From: gordon.d.woods
Date: Wed, 23 Dec 1992 14:35

9 lines
1008 bytes

From article <1517@chorus.chorus.fr>, by ngk@opera.chorus.fr (Gia-Khanh Nguyen):
> 
> The problem is that I often have the tweeters and/or some capacitors of the
> filters broken, but never the other elements. I think that the filters for
> the broken tweeters are not well designed or it misses some sort of protection.
Tweeters usually fail because of excessive distortion in the amp;
frequently clipping. The amp may be clipping even though rated at
250w. Also, if there are loose connections, dropping stylus on records,
etc. that create transients, these can damage tweeters.

Technical Details

Message-ID: <1992Dec23.143518.28169@cbnewsl.cb.att.com>

Path: arc1-ca.pugleaf.net!sparky!uunet!zaphod.mps.ohio-state.edu!pacific.mps.ohio-state.edu!linac!att!cbnewsm!cbnewsl!gdw

References: <1517@chorus.chorus.fr>

Show Full Headers

Complete Article Headers

Newsgroups: sci.electronics
Path: arc1-ca.pugleaf.net!sparky!uunet!zaphod.mps.ohio-state.edu!pacific.mps.ohio-state.edu!linac!att!cbnewsm!cbnewsl!gdw
From: gdw@cbnewsl.cb.att.com (gordon.d.woods)
Subject: Re: Speakers loose tweeters and filter elements
Organization: AT&T Bell Laboratories
Date: Wed, 23 Dec 1992 14:35:18 GMT
Message-ID: <1992Dec23.143518.28169@cbnewsl.cb.att.com>
References: <1517@chorus.chorus.fr>
Lines: 9

Reply to Parent Message