Gemini 4002/4003 car alarm

Article View: sci.electronics

Article #15159

#15159

From: Henrik Bechmann
Date: Fri, 20 Nov 1992 13:07

17 lines
1036 bytes

I have one of those fitted in my car, and the users manual states that
it is possible to switch between voltage sensing mode and no voltage
sensing mode by setting a switch. I don't want it to be voltage
sensing, but the alarm reacts on voltage changes in both modes :-( 

Does anybody out there have any suggestions to solve the problem
(without a separate battery for the alarm), or does anybody have acces
to a Service Manual or an electronics diagram of the thing?

Any help will be very much apreciated.

Henrik.
--
-----------------------
! Henrik Bechmann     !
! hb@vip.imsor.dth.dk !
-----------------------

Technical Details

Message-ID: <hb.722264852@vip>

Path: arc1-ca.pugleaf.net!sparky!uunet!mcsun!sunic!dkuug!uts!hb

Show Full Headers

Complete Article Headers

Path: arc1-ca.pugleaf.net!sparky!uunet!mcsun!sunic!dkuug!uts!hb
From: hb@imsor.dth.dk (Henrik Bechmann)
Newsgroups: sci.electronics,rec.audio.car,alt.locksmithing
Subject: Gemini 4002/4003 car alarm
Message-ID: <hb.722264852@vip>
Date: 20 Nov 92 13:07:32 GMT
Sender: news@uts.uni-c.dk (News)
Organization: UNI-C, Danish Computing Centre for Research and Education
Lines: 17
Nntp-Posting-Host: vip.imsor.dth.dk