Article View: sci.electronics
Article #15188Re: Want to convert RGB to NTSC signals
From: Mark Zenier
Date: Sat, 21 Nov 1992 01:21
Date: Sat, 21 Nov 1992 01:21
19 lines
1170 bytes
1170 bytes
jhwhit01@ulkyvx.louisville.edu wrote: : In article <1992Nov19.232950.24188@serval.net.wsu.edu>, Leonard Hermens <lhermens@eecs.wsu.edu> writes: : > I need to convert RGB (red-green-blue) video signals to NTSC TV : > standard video. I have RGB signals, black and white NTSC, and composite : > sync signals available, but I don't know what device/circuit/wiring : > is required to convert the RGB signals to NTSC. : : Check out the Motorola MC1377P RGB-to-PAL/NTSC encoder chip. : The 1377P will do : what you want with little additional parts (resistors, caps, colorburst crystal : or TTL clock signal). And the special parts (the delay line and chroma bandpass transfomer) are available from Digi-key in the TOKO section. Mark Zenier markz@ssc.wa.com
Technical Details
Message-ID:
<1992Nov21.012136.1361@ssc.com>Path:
arc1-ca.pugleaf.net!sparky!uunet!nwnexus!ole!ssc!markzReferences:
<1992Nov20.145541.1@ulkyvx.louisville.edu>Show Full Headers
Complete Article Headers
Newsgroups: sci.electronics Path: arc1-ca.pugleaf.net!sparky!uunet!nwnexus!ole!ssc!markz From: markz@ssc.com (Mark Zenier) Subject: Re: Want to convert RGB to NTSC signals Organization: SSC, Inc., Seattle, WA Date: Sat, 21 Nov 1992 01:21:36 GMT Message-ID: <1992Nov21.012136.1361@ssc.com> X-Newsreader: TIN [version 1.1 PL6] References: <1992Nov20.145541.1@ulkyvx.louisville.edu> Lines: 20