Article View: sci.electronics
Article #15532Re: Substituting fsuppli
From: Henry Spencer
Date: Tue, 29 Dec 1992 20:46
Date: Tue, 29 Dec 1992 20:46
18 lines
1380 bytes
1380 bytes
In article <BzzBDz.G00@acsu.buffalo.edu> v064mb9k@ubvmsb.cc.buffalo.edu (NEIL GANDLER) writes:
>Are DC adapters pretty regulated on their own. If I dont exceed the
>amperage can I be sure that the output voltage will notmuch below
>12 volts ...
In my experience, no. The output voltage varies quite substantially with
the current drain. My guess is that they don't have any regulation in
them, just transformer plus diodes plus (I hope) a filter capacitor.
This is plenty good enough for their original application -- battery
elimination -- since equipment powered by (non-rechargeable) batteries
has to tolerate wide voltage change as batteries age.
I'd expect that some adapters are better than others, so the definitive
answer is to test your adapter under load: buy a handful of power
resistors and try it out. But don't get your hopes too high.
--
"God willing... we shall return." | Henry Spencer @ U of Toronto Zoology
-Gene Cernan, the Moon, Dec 1972 | henry@zoo.toronto.edu utzoo!henry
Technical Details
Message-ID:
<C01GE6.K0F@zoo.toronto.edu>Path:
arc1-ca.pugleaf.net!sparky!uunet!munnari.oz.au!spool.mu.edu!torn!utzoo!henryReferences:
<BzzBDz.G00@acsu.buffalo.edu>Show Full Headers
Complete Article Headers
Newsgroups: sci.electronics Path: arc1-ca.pugleaf.net!sparky!uunet!munnari.oz.au!spool.mu.edu!torn!utzoo!henry From: henry@zoo.toronto.edu (Henry Spencer) Subject: Re: Substituting fsuppli Message-ID: <C01GE6.K0F@zoo.toronto.edu> Date: Tue, 29 Dec 1992 20:46:53 GMT References: <BzzBDz.G00@acsu.buffalo.edu> Organization: U of Toronto Zoology Lines: 18