DX2 compatible boards?

Article View: sci.electronics

Article #15547

#15547

From: C.E. Piggott
Date: Wed, 16 Dec 1992 18:40

11 lines
992 bytes

What's the difference between a 486-DX2 compatible board and an ordinary
486 board?  Could you take a 486-33 out of a 486-33 board, plug in a
486-66Dx2, and expect it to work?

Chris
-- 
Christopher E. Piggott, WZ2B                    cep4478@ultb.isc.rit.edu
President                                       wz2b.ampr [44.69.0.1]
Rochester Institute of Technology               wz2b @ WB2PSI.#WNY.NY.USA.NA
Amateur Radio Club K2GXT                        CEP4478@RITVAXA.BITNET

Technical Details

Message-ID: <1992Dec16.184022.23331@ultb.isc.rit.edu>

Path: arc1-ca.pugleaf.net!sparky!uunet!usc!rpi!batcomputer!cornell!rochester!rit!isc-newsserver!cep4478

Show Full Headers

Complete Article Headers

Newsgroups: sci.electronics
Path: arc1-ca.pugleaf.net!sparky!uunet!usc!rpi!batcomputer!cornell!rochester!rit!isc-newsserver!cep4478
From: cep4478@ultb.isc.rit.edu (C.E. Piggott )
Subject: DX2 compatible boards?
Message-ID: <1992Dec16.184022.23331@ultb.isc.rit.edu>
Originator: cep4478@ultb
Sender: news@ultb.isc.rit.edu (USENET News System)
Nntp-Posting-Host: ultb-gw.isc.rit.edu
Reply-To: cep4478@ultb.rit.edu ()
Organization: Rochester Institute of Technology
Date: Wed, 16 Dec 1992 18:40:22 GMT
Lines: 11