Re: Transmission line question

Article View: sci.electronics

Article #15549

#15549

From: Tim Beatty~
Date: Wed, 16 Dec 1992 20:40

20 lines
1511 bytes

In article <1992Dec15.202004.15878@ucsu.Colorado.EDU>, barr@tramp.Colorado.EDU (BARR DOUG) writes:
> Some specs I have call for ethernet coax to be grounded in one location
> and one location only! I am wondering why this is. Antenna effects,
> current loops or something else. Does anyone know why this is the case?
> 
Ground loops.  Senturia and Wedlock have a good entry level discussion on ground
loops and single point grounding in their "Electronic Cicuits" or something like
that.

Tim
-- 
--------------------------------------------------------------------------------
 Tim Beatty              |  tbeatty@az.intel.com
 Intel Corp., CH3-91     |  The opinions expressed are my own.
 5000 W. Chandler Blvd.  |
 Chandler, AZ  85226     |  "It is so hot in some parts of the world
                         |   that the people there have to live other places."
 (602)554-8156           |   - Unknown Fifth Grader on Science test
--------------------------------------------------------------------------------

Technical Details

Message-ID: <1go47lINNncj@chnews.intel.com>

Path: arc1-ca.pugleaf.net!sparky!uunet!cs.utexas.edu!asuvax!chnews!tbeatty

References: <1992Dec15.202004.15878@ucsu.Colorado.EDU>

Show Full Headers

Complete Article Headers

Path: arc1-ca.pugleaf.net!sparky!uunet!cs.utexas.edu!asuvax!chnews!tbeatty
From: tbeatty@sedona.intel.com (Tim Beatty~)
Newsgroups: sci.electronics
Subject: Re: Transmission line question
Date: 16 Dec 1992 20:40:21 GMT
Organization: Intel Corporation
Lines: 20
Sender: tbeatty@sedona (Tim Beatty~)
Distribution: world
Message-ID: <1go47lINNncj@chnews.intel.com>
References: <1992Dec15.202004.15878@ucsu.Colorado.EDU>
NNTP-Posting-Host: thunder.intel.com
Originator: tbeatty@sedona

Reply to Parent Message