Article View: sci.electronics
Article #16122Re: How to build a cheap, reliable comm link?
From: Jeroen Belleman
Date: Thu, 21 Jan 1993 13:17
Date: Thu, 21 Jan 1993 13:17
22 lines
1419 bytes
1419 bytes
In article <pell.727566512@isy> pell@isy.liu.se (P{r Emanuelsson) writes:
>Hi. I am currently looking at building a uni-directional 100 kbit/s link
>for long distances (cable). I will probably FSK modulate a 100 MHz carrier
>or something similar. I'd very much like suggestions for a chip pair to
>perform the above data transfer. It has to be reliable and cost is a major
>factor. I'd prefer to transmit/receive bytes of data, but a bit stream with
>clock is acceptable. Also, if there are chips for performing the
>abovementioned FSK (de)modulation, I'd appreciate some pointers. Will
>summarize answers.
AMD makes a few chips that might just be what you're looking for.
They're perhaps a bit faster than needed though.
Look up the AM7968 and AM7969, a.k.a TAXIchips.
The former accepts a parallel word which gets serialized and sent to
the latter, which convert it back to parallel format. Bit rates up
to 100M bits/s.
Cost was around $35 per chip, when I last looked.
Best regards,
Jeroen Belleman
jeroen@dxcern.cern.ch
Technical Details
Message-ID:
<1993Jan21.131718.18264@dxcern.cern.ch>Path:
arc1-ca.pugleaf.net!sparky!uunet!mcsun!dxcern!jeroenReferences:
<pell.727566512@isy>Show Full Headers
Complete Article Headers
Newsgroups: sci.electronics Path: arc1-ca.pugleaf.net!sparky!uunet!mcsun!dxcern!jeroen From: jeroen@dxcern.cern.ch (Jeroen Belleman) Subject: Re: How to build a cheap, reliable comm link? Message-ID: <1993Jan21.131718.18264@dxcern.cern.ch> Organization: CERN European Laboratory for Particle Physics References: <pell.727566512@isy> Date: Thu, 21 Jan 1993 13:17:18 GMT Lines: 22