Re: Replacement IR Remote Controls

Article View: sci.electronics

Article #16139

#16139

From: C.E. Piggott
Date: Mon, 04 Jan 1993 18:06

11 lines
1109 bytes

Every once in a while, I take apart a remote control and find that the
PC board that makes up the keyboard is covered in a yellow, sticky gunk.
I assume this is supposed to be there, to improve the conductivity of the
rubber keyboard's feet.  Does anybody know what this stuff is?

Chris
-- 
Christopher E. Piggott, WZ2B                    cep4478@ultb.isc.rit.edu
President                                       wz2b.ampr [44.69.0.1]
Rochester Institute of Technology               wz2b @ WB2PSI.#WNY.NY.USA.NA
Amateur Radio Club K2GXT                        CEP4478@RITVAXA.BITNET

Technical Details

Message-ID: <1993Jan4.180603.3222@ultb.isc.rit.edu>

Path: arc1-ca.pugleaf.net!sparky!uunet!psinntp!isc-newsserver!cep4478

References: <etxansk.726161920@garbod26>

Show Full Headers

Complete Article Headers

Newsgroups: sci.electronics
Path: arc1-ca.pugleaf.net!sparky!uunet!psinntp!isc-newsserver!cep4478
From: cep4478@ultb.isc.rit.edu (C.E. Piggott )
Subject: Re: Replacement IR Remote Controls
Message-ID: <1993Jan4.180603.3222@ultb.isc.rit.edu>
Summary: gunk inside keyboard
Originator: cep4478@ultb
Sender: news@ultb.isc.rit.edu (USENET News System)
Nntp-Posting-Host: ultb-gw.isc.rit.edu
Organization: Rochester Institute of Technology
References: <etxansk.726161920@garbod26>
Date: Mon, 4 Jan 1993 18:06:03 GMT
Lines: 11

Reply to Parent Message