Re: Good way to prototype analog circuits?

Article View: sci.electronics

Article #16242

#16242

From: Tom Gardner
Date: Tue, 05 Jan 1993 10:51

7 lines
745 bytes

For RF:
	- stick the chips upside down on a ground plane and solder
	 components directly to the leads
	- for controlled impedance lines you can purchase long narrow 
	  bits of pcb with a thin track (whose width defines the impedance)
	  on one side and self adhesive backing on the other. Simply stick this
	  to the ground plane

Technical Details

Message-ID: <72020032@otter.hpl.hp.com>

Path: arc1-ca.pugleaf.net!sparky!uunet!usc!sdd.hp.com!hpscit.sc.hp.com!hplextra!otter.hpl.hp.com!otter!tgg

References: <1993Jan3.231733.15225@ee.ubc.ca>

Show Full Headers

Complete Article Headers

From: tgg@otter.hpl.hp.com (Tom Gardner)
Date: Tue, 5 Jan 1993 10:51:07 GMT
Subject: Re: Good way to prototype analog circuits?
Message-ID: <72020032@otter.hpl.hp.com>
Organization: Hewlett-Packard Laboratories, Bristol, UK.
Path: arc1-ca.pugleaf.net!sparky!uunet!usc!sdd.hp.com!hpscit.sc.hp.com!hplextra!otter.hpl.hp.com!otter!tgg
Newsgroups: sci.electronics
References: <1993Jan3.231733.15225@ee.ubc.ca>
Lines: 8

Reply to Parent Message