Re: Problem with 68hc705 eval. kit

Article View: sci.electronics

Article #16264

#16264

From: Mike Tarrant
Date: Tue, 05 Jan 1993 15:39

14 lines
902 bytes

In article <1993Jan1.162603.6390@desire.wright.edu> cse0239@desire.wright.edu writes:
>I got the 68hc705kics kit and it seems to work correctly on everything
>except blank check of the part. Has anyone had success blank checking
>an erased part? 
>
>Could this be a problem with my I/O port?
>
>

I had problems erasing a 705K1 also.  It took about 10-15 minutes.  I
then cleaned the window off better (there was still some adhesive from
the label stuck to the part).  After programming it again, it erased
in 2-3 minutes.  Try it and see if it works.

Technical Details

Message-ID: <C0E0uE.83E@ATK.COM>

Path: arc1-ca.pugleaf.net!sparky!uunet!nwnexus!snuffy!mtarrant

References: <1993Jan1.162603.6390@desire.wright.edu>

Show Full Headers

Complete Article Headers

Newsgroups: sci.electronics
Path: arc1-ca.pugleaf.net!sparky!uunet!nwnexus!snuffy!mtarrant
From: mtarrant@ATK.COM (Mike Tarrant)
Subject: Re: Problem with 68hc705 eval. kit
Message-ID: <C0E0uE.83E@ATK.COM>
Organization: Alliant TechSystems Inc.
References: <1993Jan1.162603.6390@desire.wright.edu>
Date: Tue, 5 Jan 1993 15:39:48 GMT
Lines: 16

Reply to Parent Message