Article View: sci.electronics
Article #16318Re: 110V -> 220/240Vconversion for appliances
From: Eric Gisin
Date: Fri, 22 Jan 1993 21:50
Date: Fri, 22 Jan 1993 21:50
24 lines
1632 bytes
1632 bytes
In article <7263@m1.cs.man.ac.uk> apm@kaa.ee.umist.ac.uk (Paul Marriott) writes: I am shortly moving to Canada and have quite a bit of UK electrical equipment to take. Obviously, this is rated at 240V, 50Hz. Whats the deal with transformers to convert 110->240? What sort of power ratings are available? Enough to power a 3KW kettle? Or is it better to buy stuff over there that is rated at 110V? Also, is it possible to wire two outlets in series to get 220V? Or is that asking for trouble!? --- You can install 15A, 230-240V receptacles and meet the Canadian electric code. You can run a circuit to the distribution panel, or (not to code) connect to the split 120-120V receptacles that all recently wired kitchen counters have. However, if you plug in any non-CSA approved appliances into any outlet, and they cause a fire, your insurance will not pay any claims. 3KW kitchen appliances must be wonderful. We don't have anything in north america over 1750 watts, and they all are much lower power than an electric or gas range.
Technical Details
Message-ID:
<ERIC.93Jan22165058@kilo.mks.com>Path:
arc1-ca.pugleaf.net!sparky!uunet!cs.utexas.edu!torn!watserv2.uwaterloo.ca!watserv1!mks.com!kilo!ericReferences:
<7263@m1.cs.man.ac.uk>Show Full Headers
Complete Article Headers
Newsgroups: sci.electronics Path: arc1-ca.pugleaf.net!sparky!uunet!cs.utexas.edu!torn!watserv2.uwaterloo.ca!watserv1!mks.com!kilo!eric From: eric@kilo.mks.com (Eric Gisin) Subject: Re: 110V -> 220/240Vconversion for appliances In-Reply-To: apm@kaa.ee.umist.ac.uk's message of 19 Jan 93 17:57:06 GMT Message-ID: <ERIC.93Jan22165058@kilo.mks.com> Followup-To: sci.electronics Sender: eric@mks.com (Eric Gisin) Organization: Mortice Kern Systems Inc., Waterloo, Ontario, CANADA References: <7263@m1.cs.man.ac.uk> Date: Fri, 22 Jan 1993 21:50:58 GMT Lines: 25