Do I need FCC approval for small devices?

Article View: sci.electronics

Article #16426

#16426

From: Jim "Throw it over the wall" Was...
Date: Wed, 06 Jan 1993 06:35

10 lines
828 bytes

I have designed a small micro-contoller based product. It contains the 
micro-controller, a DTMF tone decoder, and some glue chips. I am
considering marketing this in both kit form, and as an assembled product.

Do I need to get some sort of an FCC approval on this? It is a computer
of sorts... and I understand that all computers must meet FCC standards..

Any thoughts?

 - jim  washer@sequent.com

Technical Details

Message-ID: <1993Jan6.063517.14107@sequent.com>

Path: arc1-ca.pugleaf.net!sparky!uunet!sequent!muncher.sequent.com!washer

Show Full Headers

Complete Article Headers

Newsgroups: sci.electronics
Path: arc1-ca.pugleaf.net!sparky!uunet!sequent!muncher.sequent.com!washer
From: washer@sequent.com (Jim "Throw it over the wall" Washer)
Subject: Do I need FCC approval for small devices?
Message-ID: <1993Jan6.063517.14107@sequent.com>
Sender: usenet@sequent.com (usenet )
Nntp-Posting-Host: crg8.sequent.com
Organization: Sequent Computer Systems, Inc.
Date: Wed, 6 Jan 93 06:35:17 GMT
Lines: 10