Article View: sci.electronics
Article #16461Re: Mounting Large Axials
From: Bill Mayhew
Date: Sun, 24 Jan 1993 15:08
Date: Sun, 24 Jan 1993 15:08
15 lines
1027 bytes
1027 bytes
>ways for mouting axial lead capacitors. The way I do it, space permitted, is to drill a hole on each side of the capacitor and strap it down to the PC board with a nylon tie wrap. I'd imagine that glue would be problematic due to the fact that the aluminum case of the capcitor is likely to have quite different thermal charcacteristics from the surface on which it is mounted. -- Bill Mayhew NEOUCOM Computer Services Department Rootstown, OH 44272-9995 USA phone: 216-325-2511 wtm@uhura.neoucom.edu (140.220.1.1) 146.580: N8WED
Technical Details
Message-ID:
<1993Jan24.150817.29398@uhura.neoucom.edu>Path:
arc1-ca.pugleaf.net!sparky!uunet!olivea!spool.mu.edu!yale.edu!qt.cs.utexas.edu!cs.utexas.edu!swrinde!gatech!usenet.ins.cwru.edu!neoucom.edu!wtmReferences:
<1993Jan20.104910.19417@actcnews.res.utc.com>Show Full Headers
Complete Article Headers
Path: arc1-ca.pugleaf.net!sparky!uunet!olivea!spool.mu.edu!yale.edu!qt.cs.utexas.edu!cs.utexas.edu!swrinde!gatech!usenet.ins.cwru.edu!neoucom.edu!wtm From: wtm@uhura.neoucom.edu (Bill Mayhew) Newsgroups: sci.electronics Subject: Re: Mounting Large Axials Message-ID: <1993Jan24.150817.29398@uhura.neoucom.edu> Date: 24 Jan 93 15:08:17 GMT References: <1993Jan20.104910.19417@actcnews.res.utc.com> Organization: Northeastern Ohio Universities College of Medicine Lines: 15