Wanted to purchase: scope probes with 10x display actuator

Article View: sci.electronics

Article #16497

#16497

From: Bruce Allen
Date: Mon, 25 Jan 1993 16:03

14 lines
1183 bytes

I have an old (1971) Tektronix 432 dual-trace scope that I've been
fixing up for home use.  This scope has vertical gain controls
whose readings can be changed by the scope probe.  I'm looking for
a couple of good-condition probes, either Tek or another manufacturer,
which have a x1 and x10 switch and incorporate a display actuator
which switches the vertical gain displays appropriately.

The scope is modest bandwidth, about 50Mhz, and 1Mohm input impedance, 
so just about any decent probes should work.  If you've got a pair lying
around, please sell them to me!  You can reach me at 414-229-6439 (work)
or 414-962-0516 (home) - central time zone.  Or email me directly at
work: ballen@dirac.phys.uwm.edu .
	Thanks,
			Bruce Allen

Technical Details

Message-ID: <1k130mINN855@uwm.edu>

Path: arc1-ca.pugleaf.net!sparky!uunet!cs.utexas.edu!zaphod.mps.ohio-state.edu!uwm.edu!convex.csd.uwm.edu!ballen

Show Full Headers

Complete Article Headers

Path: arc1-ca.pugleaf.net!sparky!uunet!cs.utexas.edu!zaphod.mps.ohio-state.edu!uwm.edu!convex.csd.uwm.edu!ballen
From: ballen@convex.csd.uwm.edu (Bruce Allen)
Newsgroups: sci.electronics
Subject: Wanted to purchase: scope probes with 10x display actuator
Date: 25 Jan 1993 16:03:34 GMT
Organization: Computing Services Division, University of Wisconsin - Milwaukee
Lines: 15
Message-ID: <1k130mINN855@uwm.edu>
NNTP-Posting-Host: 129.89.7.30