Article View: sci.electronics
Article #16571Re: Problem with 68hc705 eval. kit
From: Sam Habegger
Date: Thu, 07 Jan 1993 15:12
Date: Thu, 07 Jan 1993 15:12
13 lines
945 bytes
945 bytes
In article <1993Jan1.162603.6390@desire.wright.edu> cse0239@desire.wright.edu writes: >I got the 68hc705kics kit and it seems to work correctly on everything >except blank check of the part. Has anyone had success blank checking >an erased part? > >Could this be a problem with my I/O port? > > Try a shorter cable between the printer port and the evaluation board. On an XT compatible I had to use a long cable to run the simulator and a short cable to get a successful blank check to program the eprom.
Technical Details
Message-ID:
<C0How6.Dvu@mentor.cc.purdue.edu>Path:
arc1-ca.pugleaf.net!sparky!uunet!wupost!emory!gatech!usenet.ins.cwru.edu!agate!ames!purdue!mentor.cc.purdue.edu!agbReferences:
<1993Jan1.162603.6390@desire.wright.edu>Show Full Headers
Complete Article Headers
Newsgroups: sci.electronics Path: arc1-ca.pugleaf.net!sparky!uunet!wupost!emory!gatech!usenet.ins.cwru.edu!agate!ames!purdue!mentor.cc.purdue.edu!agb From: agb@mentor.cc.purdue.edu (Sam Habegger) Subject: Re: Problem with 68hc705 eval. kit Message-ID: <C0How6.Dvu@mentor.cc.purdue.edu> Organization: Purdue University Computing Center References: <1993Jan1.162603.6390@desire.wright.edu> Date: Thu, 7 Jan 1993 15:12:05 GMT Lines: 13