🚀 go-pugleaf

RetroBBS NetNews Server

Inspired by RockSolid Light RIP Retro Guy

Article View: sci.electronics
Article #16598

Re: MouseSystems Mice

#16598
From: slmdj
Date: Thu, 07 Jan 1993 16:51
58 lines
3397 bytes
In article <1993Jan07.145120.22489@uhura.neoucom.edu>, wtm@uhura.neoucom.edu (Bill Mayhew) writes:
> On converting Mouse Systems mice:  it depends...
> 
> The orginal Mouse Systems mice for the PC did have three buttons
> and used only a 200 cpi pad.  There were two versions of the three
> button mice.  "Very old" (~1987) units required a small battery
> eliminator transformer.  The slightly newer 3B mice were self
> powered.  (Incidentally, I suspect this might have had something to
> do with devices that are self-powered from the serial port; there
> is a patent out on the technique -- I forget who holds it at the
> moment.)  The three button mice send a five byte protocol that is
> the same as Summagraphics devices (and I think Logitech).


~1 year ago, I bought a _3-button_ Mouse Systems mouse for my PC... It also
came with an ?aluminum? mouse board.  The date of manufacture, I think, was
sometime in 1991.  Just a couple of questions on the general subject-- what is
the third (middle) button good for?  I have read the docs, but can't seem to
find anything pertinent.  

> 
> The newer Mouse Systems two button mice are self powered and use a
> three byte protocol that is the same as Microsoft mice.  The newer
> mice can sense either a 200 or 400 cpi mouse board.  There have
> been several different types of mouse boards: metal and plastic.
> The best boards were the 400 cpi boards that came with the later
> Sun-3 models (my opinion).  The mouse boards are available in
> several different sizes.  One used to be able to get mouse boards
> from Mouse Systems directly, but last time I talked to them, they
> didn't want to sell in less than OEM quantities.  I like the Sun
> verision that is about 15 cm * 15 cm.
> 
> I haven't had a chance to try out latest Mouse Systems PC mouse.
> It looks like it comes with a very high resolution board made of
> aluminum.
> 
> The only bad thing about MS mice is that I've had several old ones
> that blew a CCD line sensor.  I'd have thought the LEDs would go
> out, but I haven't had that happen yet.
> 
> 
> -- 
> Bill Mayhew      NEOUCOM Computer Services Department
> Rootstown, OH  44272-9995  USA    phone: 216-325-2511
> wtm@uhura.neoucom.edu (140.220.1.1)    146.580: N8WED

BTW-- I previously had a mechanical mouse that didn't work worth s**t.  To
anyone out there cursing your current mouse, you might want to look into one of
Mouse System's optical mice... Pure heaven after my previous mech. one!!!

-- 
********************************************************************************
      Paul Cowley      * ----looking for one of those spiffy quotations for my
   ==EE Undergrad==    * .sig...  Any Suggestions???
 Utah State University *
  C/A1C  CAP Utah Wing *
   slmdj@cc.usu.edu    *
********************************************************************************
Technical Details
Message-ID: <1993Jan7.105138.62525@cc.usu.edu>
Path: arc1-ca.pugleaf.net!sparky!uunet!noc.near.net!hri.com!spool.mu.edu!agate!dog.ee.lbl.gov!hellgate.utah.edu!cc.usu.edu!slmdj
References: <1993Jan6.044206.3288@bpdsun1.uucp> <1ier74INNfjr@sdl.Warren.MENTORG.COM> <1993Jan6.190920.5534@mcs.anl.gov> <1993Jan07.145120.22489@uhura.neoucom.edu>

Show Full Headers
Complete Article Headers
Path: arc1-ca.pugleaf.net!sparky!uunet!noc.near.net!hri.com!spool.mu.edu!agate!dog.ee.lbl.gov!hellgate.utah.edu!cc.usu.edu!slmdj
From: slmdj@cc.usu.edu
Newsgroups: sci.electronics
Subject: Re: MouseSystems Mice
Message-ID: <1993Jan7.105138.62525@cc.usu.edu>
Date: 7 Jan 93 16:51:38 GMT
References: <1993Jan6.044206.3288@bpdsun1.uucp> <1ier74INNfjr@sdl.Warren.MENTORG.COM> <1993Jan6.190920.5534@mcs.anl.gov> <1993Jan07.145120.22489@uhura.neoucom.edu>
Organization: Utah State University
Lines: 58