🚀 go-pugleaf

RetroBBS NetNews Server

Inspired by RockSolid Light RIP Retro Guy

Article View: sci.electronics
Article #16673

Re: making 110V into 220v

#16673
From: Mark Zenier
Date: Wed, 27 Jan 1993 05:28
19 lines
1290 bytes
Darin Latimer (dlatimer@iris4.chem.arizona.edu) wrote:
: In article <C19oyE.GnM@panix.com>, dannyb@panix.com (Daniel Burstein) writes:
: |> Heavy duty appliances, such as electrical dryers, stoves, ovens, or
: |> (large) air conditioners will run on 220V.  They get this by feeding both
: |> legs of the electrical supply (which are 110V in opposite phase) to the
:                                             ^^^^^^^^^^^^^^^^^^^^^^^
:    Again, usually three legs at 120V each, 120 degrees out of phase with 
:    respect to each other.

NO.  In this residential neighborhood, the distribution transformers are
fed with a single phase and have a center tapped winding.  So the two 
phases are 180 degrees apart.  

In an industrial area, or on a campus, that would not necessarily be
true.

Mark Zenier  markz@ssc.wa.com  

26 kV, trees, above ground wiring and 95 MPH wind storms don't mix.
Technical Details
Message-ID: <1993Jan27.052800.11679@ssc.com>
Path: arc1-ca.pugleaf.net!sparky!uunet!nwnexus!ole!ssc!markz
References: <1993Jan23.190516.29854@organpipe.uug.arizona.edu>

Show Full Headers
Complete Article Headers
Newsgroups: sci.electronics
Path: arc1-ca.pugleaf.net!sparky!uunet!nwnexus!ole!ssc!markz
From: markz@ssc.com (Mark Zenier)
Subject: Re: making 110V into 220v
Organization: SSC, Inc.,  Seattle, WA
Date: Wed, 27 Jan 1993 05:28:00 GMT
Message-ID: <1993Jan27.052800.11679@ssc.com>
X-Newsreader: TIN [version 1.1 PL6]
References: <1993Jan23.190516.29854@organpipe.uug.arizona.edu>
Lines: 21